Dogbone install issues need help ASAP - Focus Fanatics
Focus Fanatics Ford Focus Forums
HomeContact UsAbout UsGalleryDiscussion ForumsMarketplace



Go Back   Focus Fanatics > Ford Focus Tech Discussions > DURATEC Performance (2003-2011)

DURATEC Performance (2003-2011) The place to chat about any Duratec 23, 23E, and 20 engine performance, tuning and exhaust related upgrades.

Search This Forum | Image Search | Advanced Search    
FocusFest Ford Focus Tire & Wheels FocusFanatics Merchandise

Reply
 
Thread Tools Display Modes
Old 01-09-2013, 06:10 PM   #1
TKE_Quailman
FF God of South FL
 
TKE_Quailman's Avatar
 
Join Date: Feb 2007
Fan#: 44442
Location: Miami, FL
What I Drive: 07 Pitch Black ZX3

Posts: 2,417
FF Reputation: 35 TKE_Quailman Great Standing Member
Buy-Sell-Trade Rating: (2)
Dogbone install issues need help ASAP

Hey i am midway install in the dark getting eaten by mosquitoes is FL and im installing a CFM ply dogbone mount and i have run into 2 issues 1) it looks like my tranny doesn't align with the body mount. 2)The CFM mount wont go into the tranny mount like if the poly urethane bushing is to large it gets 85% in and then gets stuck i dunno if i should grease it up and try and shove it in there.

Also i have a 2007 manual i am 100% i ordered the correct mount just checked my order with CFM


__________________
02 Black ZX5 R.I.P.
07 Black ZX3 Work in progress
Last of the Hatches #1
XBOX LIVE:TKE428
GIVE REP POINTS IF IM HELPFUL
TKE_Quailman is offline  
    Reply With Quote
Sponsored Links
Advertisement
 
Old 01-09-2013, 06:19 PM   #2
macdiesel
I used to drive this
 
macdiesel's Avatar
 
Join Date: Jan 2006
Fan#: 31579
Location: Chicago, IL
What I Drive: 2010 mazdaspeed3

Posts: 3,300
FF Reputation: 21 macdiesel Great Standing Member
Buy-Sell-Trade Rating: (11)
Pry bar, wood block and hammar will be your friends with this install.
__________________
"When does the zetec kick in"
Asked by a Honda enthusiast
macdiesel is offline  
    Reply With Quote
Old 01-09-2013, 06:35 PM   #3
mashore81
Focus Rookie
 
Join Date: Nov 2012
Fan#: 105575
Location: Rancho Cordova, CA
What I Drive: 03 Pitch Black Sedan PZEV

Posts: 18
FF Reputation: 1 mashore81 Good Standing Member
Buy-Sell-Trade Rating: (0)
I did a poly bushing swap by myself at night. when I needed that extra push I started the car up and rocked the engine. Probably not recommended but I had work in the morning. Good luck.
mashore81 is offline  
    Reply With Quote
Old 01-09-2013, 06:38 PM   #4
macdiesel
I used to drive this
 
macdiesel's Avatar
 
Join Date: Jan 2006
Fan#: 31579
Location: Chicago, IL
What I Drive: 2010 mazdaspeed3

Posts: 3,300
FF Reputation: 21 macdiesel Great Standing Member
Buy-Sell-Trade Rating: (11)
You don't need to start it up? Can also use a jack under the trans to help manipulate the position.
__________________
"When does the zetec kick in"
Asked by a Honda enthusiast
macdiesel is offline  
    Reply With Quote
Old 01-09-2013, 08:04 PM   #5
rambleon84
So mote be it
 
rambleon84's Avatar
 
Join Date: Nov 2007
Fan#: 51521
Location: columbus, OH
What I Drive: 2007 Dark Toreador Red ZX3

Posts: 4,876
FF Reputation: 20 rambleon84 Great Standing Member
Buy-Sell-Trade Rating: (14)
Quote:
Originally Posted by macdiesel View Post
You don't need to start it up? Can also use a jack under the trans to help manipulate the position.
that's what I had to do. needed lots of help getting it lined back up. pita but worth it. just have to use force, be good to have some one else helping, wasn't easy with the car only on jack stands getting leverage
rambleon84 is offline  
    Reply With Quote
Old 01-09-2013, 08:07 PM   #6
sleepyboy
FF's Night Security
 
sleepyboy's Avatar
 
Join Date: Nov 2004
Fan#: 15335
Location: SW Houston, TX, United States
What I Drive: 01' Yellow ZX3 euro, 04' ZX5 SVT

Posts: 23,673
FF Reputation: 46 sleepyboy Great Standing Member
Buy-Sell-Trade Rating: (11)
Yup, I used a jack to help align it as well, though other times I didn't. Have you ever replaced your passenger side? I know mine was worn out and was letting the motor sit a lot lower than it should have.
__________________
I started out with nothing and I still have most of it left

Hatch Nation #15 (Ole' Yeller') & #150 (The SVT)
Moderator for
Technical Chat
Zetec Performance Chat
Southern Fanatics Chat
sleepyboy is online now  
    Reply With Quote
Old 01-09-2013, 08:59 PM   #7
Svt_kid
Focus Enthusiast
 
Svt_kid's Avatar
 
Join Date: Jan 2012
Fan#: 94202
Location: Miramar, FL
What I Drive: 2004 Silver zx5 Svt

Posts: 298
FF Reputation: 1 Svt_kid Good Standing Member
Buy-Sell-Trade Rating: (1)
yea jack it up and manhandle it into place. Best part about these engines is when you take off the motor mounts everything shifts position.
Svt_kid is online now  
    Reply With Quote
Old 01-10-2013, 12:38 AM   #8
zetecDon
Where am I?
 
zetecDon's Avatar
 
Join Date: Feb 2009
Fan#: 62506
Location: east of Cincinnati, Ohio, OH
What I Drive: 02 ZX3, 02 MX-5

Posts: 6,832
FF Reputation: 28 zetecDon Great Standing Member
Buy-Sell-Trade Rating: (44)
Moved to "Duratec Performance".
zetecDon is offline  
    Reply With Quote
Old 01-10-2013, 10:54 AM   #9
TKE_Quailman
FF God of South FL
 
TKE_Quailman's Avatar
 
Join Date: Feb 2007
Fan#: 44442
Location: Miami, FL
What I Drive: 07 Pitch Black ZX3

Posts: 2,417
FF Reputation: 35 TKE_Quailman Great Standing Member
Buy-Sell-Trade Rating: (2)


Still not going in i am open to ideas and suggestions
tools used a jack and a crowbar so far and nothing

Also while down there i discovered my flex pipe was broken =(
__________________
02 Black ZX5 R.I.P.
07 Black ZX3 Work in progress
Last of the Hatches #1
XBOX LIVE:TKE428
GIVE REP POINTS IF IM HELPFUL
TKE_Quailman is offline  
    Reply With Quote
Old 01-10-2013, 01:10 PM   #10
rambleon84
So mote be it
 
rambleon84's Avatar
 
Join Date: Nov 2007
Fan#: 51521
Location: columbus, OH
What I Drive: 2007 Dark Toreador Red ZX3

Posts: 4,876
FF Reputation: 20 rambleon84 Great Standing Member
Buy-Sell-Trade Rating: (14)
Well my experience isnt going to help, I had the opposite problem. Those two points were too close and I had to push the engine away. Along with my floor jack and a block of wood under the tranny/engine to support/move the weight while trying to get it to line up

If you raise the car higher/lower, will that create a pivot and let gravity push those two points closer? (I'm trying to orientate myself to that picture, front of the car is to the right, correct?) Do you have any ratchet straps you can hook around the subframe and engine to pull those two points closer?

No idea if either of those are viable or dumb...just throwing out ideas. I'm getting the impression you are working on this yourself. Glad you stopped on it last night, sounded like it had be super frustrating (I know i had to sleep on mine after not getting it done the night i tried to install it.)
rambleon84 is offline  
    Reply With Quote
Reply

Bookmarks & Social Networks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:58 PM.


Copyright 2002-2014 FocusFanatics.com. All Rights Reserved : Terms of Use : Privacy Policy : Advertise Information : Site Map

Focus Fanatics Ford Focus Forum offers many fun ways for you to engage with other Ford Focus Owners from across the world. Whether it be about the aftermarket performance modifications, technical how-to's, European tuned suspension or awesome fuel economy similar to the Acura TLX. You can find all Ford Focus related information here. Join our Ford Focus discussion forums and chat with local Focus enthusiasts in your area.