The 2 Dollar 5 Minute Clutch Pressure Bleed Method - Ford Focus Forum, Ford Focus ST Forum
Ford Focus Forum
HomeContact UsAbout UsGalleryDiscussion ForumsMarketplace

Go Back   Ford Focus Forum, Ford Focus ST Forum > Ford Focus Tech Discussions > General Technical Chat

General Technical Chat This section is for technical discussions relating to general maintenance, electrical issues, engine trouble, and recalls.

Search This Forum | Image Search | Advanced Search    
Ford Focus Tire & Wheels FocusFanatics Merchandise

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 12-31-2012, 09:17 PM   #1
Focus Jr. Enthusiast
DerbyDave's Avatar
Join Date: Sep 2012
Fan#: 103584
Location: Derby, KS
What I Drive: 2002 Silver ZX5

Posts: 30
FF Reputation: 1 DerbyDave Good Standing Member
Buy-Sell-Trade Rating: (0)
The 2 Dollar 5 Minute Clutch Pressure Bleed Method

I recently replaced my leaking clutch master cylinder and was having a hell of a time getting any pedal pressure at all when I was done. I tried the pump and release method with a helper and a vacuum brake bleeder, Neither were giving any satisfactory results and were taking forever. The Ford preferred method is to use a reverse pressure bleed using a special ford tool but I made my own using stuff you can find anywhere.

The parts
  • 35 CC syringe (any size will do)
  • 3 FT 1/8 inch inner diameter vinyl tubing
  • tip from a brake bleeding kit

Put the tubing on to the end of the syringe making sure that it is completely free of oil and is tight fitting. You don't want this thing to blow out under pressure. Put the bleeder tip on the other end also making sure it is tight.

First I filled the fluid reservoir to the top and then drew out fluid into the syringe and tube (This way I know it won't overflow when fluid is pushed back into it) Place the bleeder tip into the bleeder valve and hold it in place. Open the bleeder valve about 1/4 turn and then slowly inject the fluid into the clutch slave cylinder using enough pressure to move the fluid but not so much that the tubing blows off. There should be at least a few bubbles that come out the reservoir. Stop injecting fluid before the syringe is empty so you don't get air in the system. Close the bleeder valve without removing the tip or tubing so air is not introduced into the system. Two syringes full is all I needed for a firm clutch pedal. Start to finish the whole process takes 5 minutes or less. You will spend more time getting the battery out of the way to get to the bleeder valve.

2002 Ford Focus ZX5 2.0 Zetec MTX
2003 Ford Escape 3.0 Duratec

Last edited by DerbyDave; 01-02-2013 at 09:03 AM.
DerbyDave is offline  
    Reply With Quote

Bookmarks & Social Networks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 03:14 AM.

Copyright 2002-2014 All Rights Reserved : Terms of Use : Privacy Policy : Advertise Information

Focus Fanatics Ford Focus Forum offers many fun ways for you to engage with other Ford Focus Owners from across the world. Whether it be about the aftermarket performance modifications, technical how-to's, European tuned suspension or awesome fuel economy similar to the Acura TLX or Fiesta ST. You can find all Ford Focus and Focus ST related information here. Join our Ford Focus discussion forums and chat with local Focus enthusiasts in your area.