power steering reloc. install

[Blr03ZX5]

i just installed the new hose and had a question. the instructions didnt mention clearly how the line coming off the power steering pump should be routed or positioned.


this is the only way i could do it. i did have to zip tie the line out of the way because the p/s sensor only has about 3/8 of and inch before it hits the serp. belt. is this how its supposed to look? thanks

[sleepyboy]

You can route it any way you want, just so long as it's out of the way of the header.

[Blr03ZX5]

Originally Posted by sleepyboy

You can route it any way you want, just so long as it's out of the way of the header.

thanks . but my main concern is how close it is to the belt. the whole setup fits just barely in that space, seems like there may be a different way to do. the rest of the line is attached to the crash bar out of the way of everything else

[ZXthrizzle05]

I used my own custom line androuted it under the radiator support

[Blr03ZX5]

im hoping there might be a actual pic on how its supposed to look coming of the ps pump. it'll make me feel alot better knowing how its supposed to go