|
||||||||
|
Auto Cross, Drag Racing, Car Show, Awards & Prizes - Register Now! |
||||||||
|
|||||||
SPI Performance (2000-2004) The place to chat about any 2.0L Split Port Injection engine performance, tuning and exhaust related upgrades.
|
![]() |
![]() |
|
|
|
Thread Tools | Display Modes |
|
|
#1 | ||||
|
Focus Rookie
|
speedo swap
I have a 2000 Ford Focus lx with the basic speedo cluster with no tach.I was wondering if it was possible to swap it with a cluster that has the tach. I bought this car not long ago I love it but I miss not having a tach.Also will a lens cover on a speedo cluster with no tach fit a cluster with a tach. There is a instrument cluster with a tach on Ebay for cheap but it has a crack in the lens cover.
Last edited by locknut550; 11-03-2012 at 11:06 AM. |
||||
|
|
|
|
|
Remove Advertisements |
|
Focus Fanatic
Fan#: 1
|
|
|
|
#2 | ||||
|
Focus Enthusiast
|
The speedo swap is a simple plug and play, i did it in about 10 mins myself, same problem. The lens has to be one with a tach as part of the bezel is built into the lens. The mileage will take whatever the new cluster has unless you pay close to 100 to have it saved off the old and onto the new one. IF you need help with it message me on here and i can walk you through it, and i can help you reset the guages (ive only had to reset mine like 8 times!!!)
__________________
2 12" rockford fosgate subs,1500w Hifonics amp, throttle spacer, performance chip, FSWerks 2.5" race exhaust, custom CAI w/Spectre 10.5x6 filter Blue leds all around pulsating in the trunk, smoked taillights and turn signals |
||||
|
|
|
|
|
#3 | ||||
|
Focus Enthusiast
|
How cheap is cheap, there are lots of them in scrap yards. I'd check your local yards before buying on Ebay just because shipping is a killer on something that shape and size. The yards here generally charge about $25 for a cluster out of an older focus. I'd offer to get you one, but ours are in KM/Hr, the MPH is very hard to read.
There are also 3 different clusters you can get one with normal black face, the SVT which is white faced ![]() or there is another greyish faced one I have seen, it looks like it might be translucent. ![]() Here's link to a how to on changing the gauge faces, but you can use it to figure out removing and install the full cluster (just don't use the part where you open the cluster) Edit: might be handy if I actually include the link, LOL LINK here
__________________
Somewhere there's a DC10 struggling to get off the ground. I'm not a fan of wings on street cars, I like low key spoilers, but not something that you have to custom order from Boeing. |
||||
|
|
|
|
|
#4 | ||||
|
Capt. Urn
|
Quote:
Of course, this was years ago, so it may be different now.
__________________
Defending the reputation of the red-headed step-child of the focus world for far too long. |
||||
|
|
|
|
|
#6 | ||||
|
Capt. Urn
|
do it! it's cheap and easy.
__________________
Defending the reputation of the red-headed step-child of the focus world for far too long. |
||||
|
|
|
|
| Bookmarks & Social Networks |
| Thread Tools | |
| Display Modes | |
|
|
|
||||