COBB Initial Focus ST R&D Findings

[jamminsvt]

Originally Posted by old1030

Couldnt find any information on your site but when do you guys plan on releasing parts for the ST?

+1. The guy writes a very informative post. So much so that it gets stickied, and then no word for three weeks. I looked today and still no info on their website.

[alaskanzx5]

mostly likely caught up with sema and trying to make the finale designs on the upgrades for the car along with trying to test fit/design more parts. mostly likely some dyno testing and hopefully some 1/4 mile times to.

[Jshadow]

I need updates! lol

[COBB Tuning]

[FreshlyFunkTFocus]

Such a tease.

[old1030]

Originally Posted by COBB Tuning

Nice teaser ha.

[..:: sleestak ::..]

I used to have an SVT on SCT and now have forester xt using Cobb. Overall I will say the Access Ports are great little devices and there are a ton of parameters to monitor. Not sure if the focus will ha e it, but real-time flashing of ROMs are awesome: I can switch my tune from 93oct to e85 within a minute while fueling and easily switch back. You can also adjust timing and idle while the car is running.

The only complaint I have about the AP is I miss the logging of the SCT unit. For instance looking at the graph vs. the AP showing a spreadsheet of data. The real big thing though is that you are limited to the number of parameters you can log at one time. Just the other day I tried to add a only a few extra parameters to the default list and it gave me a memory warning. Hopefully you guys can address this in the future.

Overall these are great units and support seems to be good as well.

[swansong]

Where's the updates Cobb? I know you guys have been busy with the ST...

[gonefhsn]

Great write up, can wait for more.

[COBB Tuning]

We just released our new Stage 1 v102 maps and they are making some great power! Stage 2 and Stage 3 maps are also in progress.

We are also working on hard parts like the intake, exhaust, FMIC, and rear motor mount, so look for those soon as well.