svt focus slave cylinder

[uzitoads]

im needing to find one that works with the 6-speed i found one on cfm its 199$ and i found one here http://www.clutchcityonline.com/ford_focus.htm for 89$ if you know it the cheaper one works that would be good

[Sponsor]

[sleepyboy]

Make sure it's the right one. The slave cylinders are almost identical between the 6 speed and the 5speed. The only difference is the size of the hole or bore in it. Also check out Partsgeek.com they have excellent prices has well.

[StephenElsbree1986]

We talking about a Retaining Bearing and Slave Cylinder? Or Clutch Master Slave Cylinder. The first is the Throw out bearing but ours is one unit so car with ToB. Slave Cylinders are the master clutch cylinder, People at autopart stores get confused.

[macdiesel]

Originally Posted by sleepyboy

Make sure it's the right one. The slave cylinders are almost identical between the 6 speed and the 5speed. The only difference is the size of the hole or bore in it. Also check out Partsgeek.com they have excellent prices has well.

Really hard to distinguish, my clutch came with a 5speed one. Don't ask me how I found out.

[uzitoads]

thank you. im going to buy one tonight

[sleepyboy]

Originally Posted by macdiesel

Really hard to distinguish, my clutch came with a 5speed one. Don't ask me how I found out.

Probably the same way I did

[felixthecat]

Just to add= How many miles on your clutch?