Eastwood's turbo zetec build for 300hp daily driver

[iroc34]

If your 03 pump is like the 02 the idle pressure switch is on the back of the pump. I used the SVT line also. Just plug that port. I cant remember what thread it is though. I think I used a metric short bolt ?

[Eastwood]

Originally Posted by iroc34

If your 03 pump is like the 02 the idle pressure switch is on the back of the pump. I used the SVT line also. Just plug that port. I cant remember what thread it is though. I think I used a metric short bolt ?

I have 03 pump and svt line - it was as stock on my foci
I was thinking to relocate because of turbo manifold and high temperature
I am thinking to just wrap that part with ti exhaust wrap so it won't heat alot

[Chris_HT]

Originally Posted by ZXthrizzle05

Just get a 47mm precision turbo and it will spool real fast and support 300 horses easily and u won't spend more than 700 bux easily

did you ever use that one?

[ZXthrizzle05]

No I bought the 55mm one. Supports 450whp. I was told by jim that I shuld go with the 55mm one because the powerband is bigger and more exciting. Sure the spool starts around 3k but man all the way to 7200rpms is A LOT of fun and ponies to be made

[Eastwood]

I have ordered a few parts like all the gaskets and some other things and wideband going to start to assembling the bottom end and top end of the engine.. holidays are making me lazy :D

[ZXthrizzle05]

Don't forget a new rear main seal as well

[Eastwood]

Originally Posted by ZXthrizzle05

Don't forget a new rear main seal as well

yeah still need to get this one and install valves with retainers, my valve spring compressor is suck! what do you guys use for that ?

[ZXthrizzle05]

I tookmine to a machine shop

[Eastwood]

Originally Posted by ZXthrizzle05

I tookmine to a machine shop

how much for the installation of valves ?

[ZXthrizzle05]

Don't honestly remember it was bout this time last year