Remote Start and "Open Door Shut Off"

[TiPilot]

Originally Posted by bellamr

The program override button is fairly close to the module (around 12"). I would think it is unlikely that the button is located on the driver's side if your module is behind the glove box.

The glovebox is easy to remove;

1. Remove the right hand instrument panel side trim panel
2. Remove the right hand lower instrument panel insulator.
- Remove the 2 retainers.
3. Remove the glove compartment.
- Remove the 5 torx t25 screws. (1-side, 2-top, 2-bottom {way at the back})

It takes me about 5 minutes now, but on the first attempt to remove the glove box it took me about 30 minutes to find the 2 bottom torx t25 screws.

Yeah, I was hoping to avoid it... but that actually doesn't sound too bad. Thanks for the instructions!