Okay so, I broken in my clutch after 700 wanted to test the clutch and attempt a burnout at our local lame 1/8th track... Yes I'm aware that burnout on radial tires are counter productive. and instead of spinning them they made a strange grip noise, didn't hook. Freaked me out sounded like my tires came off my wheel almost. Was this wheel hop? I do have a Torsen, I'm building for FI, guess I needed opinions on this, I think I have a aftermarket dogbone mount it's red my driver/passager side is black rubber mounts. Massive claims there inserts help prevent wheel hop, should I just swap out my poly for these, and also get poly/massive if they make driver/passanger side inserts? How about the VF mount'inserts from fswerks they're alum just like stock ones but supposly they're stronger then steel ones? but 150 a pop
CM Stage 3, Alum FW, HawkPS Brake Pads, EBC Rotors, Torsen Differential, Tom's Tune, Rear Tranny Mount, FRSTS, Lunch Box Delete, MSD Coilpack, Massive Wires, Massive Strut Tower, TS Mani, TB, Cam tuning, and Cat Cam.