 |
 |
 |
||||||
 |
|
 |
||||||
|
Auto Cross, Drag Racing, Car Show, Awards & Prizes - Register Now! |
||||||||
|
|||||||
SPI Performance (2000-2004) The place to chat about any 2.0L Split Port Injection engine performance, tuning and exhaust related upgrades.
|
 |
 |
|
|
|
Thread Tools | Display Modes |
06-05-2012, 07:30 PM
|
#1 | ||||
|
Focus Enthusiast
 |
Help!!!!!!
Im looking to replace the camshaft in my 2003 2.0l spi ford focus, and I cant find anywhere the dimensions or where to purchase an aftermarket camshaft. Please help, let me know of anywhere you can buy one!!!
__________________
2 12" rockford fosgate subs,1500w Hifonics amp, throttle spacer, performance chip, FSWerks 2.5" race exhaust, custom CAI w/Spectre 10.5x6 filter Blue leds all around pulsating in the trunk, smoked taillights and turn signals |
||||
|
|
| Sponsored Links | |||
Advertisement | |||
|
06-05-2012, 08:08 PM
|
#2 | ||||
|
Moderator
 
|
i havent been able to find any for sale. you may want to walk away from repairing the SPI at this point. When i was having engine trouble with mine a few years back, i couldn't find what i needed, so i wound up trading the car in as is. you may want to just swap a zetec in at this point
__________________
Will aka Misfire 2010/2011/2012/2013 Ford Master Certified Service Advisor 2003 LX "traded in"/2010 SES "traded in"/2012 SEL Hatch "current" 
|
||||
|
|
|
|
06-05-2012, 08:19 PM
|
#3 | ||||
|
Focus Addict
|
|||||
|
|
|
|
06-08-2012, 09:09 PM
|
#4 | ||||
|
Focus Jr. Enthusiast
 |
why are you wanting to replace the cam? performance? I wouldn't even recommend it for the Zetec. If the head has not been swapped with an updated one(valve seats), then I would do that. How many miles on the engine?
|
||||
|
|
|
|
06-08-2012, 09:18 PM
|
#5 | ||||
|
Focus Enthusiast
|
Quote:
__________________
2 12" rockford fosgate subs,1500w Hifonics amp, throttle spacer, performance chip, FSWerks 2.5" race exhaust, custom CAI w/Spectre 10.5x6 filter Blue leds all around pulsating in the trunk, smoked taillights and turn signals |
||||
|
|
|
|
06-11-2012, 12:25 PM
|
#6 | ||||
|
Focus Jr. Enthusiast
|
That is good that you are replacing the head, just make sure it is an updated one, where the valve seats don't fall out.
Kyle |
||||
|
|
|
|
10-28-2012, 05:03 AM
|
#7 | ||||
|
Focus Enthusiast
|
My old thread but I need some help here, reworking my head, hardened valve seats, new intake and exhaust valves, rocker arms and springs and I found this camshaft for the SOHC engine I have...but dont know if its a hotter cam because I cant find the original specs for the cam...
http://www.rockauto.com/catalog/raframecatalog.php?ck[viewcurrency]=USD&ck[ID]=0&ck[idlist]=0 any help would be appreciated!!!
__________________
2 12" rockford fosgate subs,1500w Hifonics amp, throttle spacer, performance chip, FSWerks 2.5" race exhaust, custom CAI w/Spectre 10.5x6 filter Blue leds all around pulsating in the trunk, smoked taillights and turn signals |
||||
|
|
|
|
11-01-2012, 11:38 PM
|
#8 | ||||
|
Focus Enthusiast
|
Ok solved my own problem with my friends in the machine shop....stock cam is 186 degrees intake and exhaust and 134 degrees of separation. Also, if anyone is as crazy as me and wants to push a SPI to 200+ HP and Torque on all motor....cranecams.com carries cams for the engine.
__________________
2 12" rockford fosgate subs,1500w Hifonics amp, throttle spacer, performance chip, FSWerks 2.5" race exhaust, custom CAI w/Spectre 10.5x6 filter Blue leds all around pulsating in the trunk, smoked taillights and turn signals |
||||
|
|
|
|
|
| Bookmarks & Social Networks |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
All times are GMT -5. The time now is 05:10 AM.
 |
|
 |
||
 |
|
 |