camber arms and toe arms
I just installed the camber and toe arms on mine this weekend. I like the quality.
I forgot to measure when I had it up on the jacks but what size is the jam nut? I used a adjustable wrench to tighten them but an open end wrench would allow more easy access but I didn't have one that big.
Oh I thought I'd mention that yo may want to offer a reminder to those folks that install the camber arms that they need to know if a set of M12x1.75 nuts may be needed also. I had to get a couple since my trailing arms had been modified to allow for a camber bolt kit. The factory nut is cut off the trailing arm bracket to put the camber bolt kit on.
03 SVT Focus, Comp Orange, EAP, Eibach sway bars, H&R Race Springs, Koni Sports, steeda shifter, Massive camber arms, toe links, engine mount bushings, sway bar end links.
other car: 2004 SVT Cobra Coupe, Screaming Yellow, 2.76/2lb lower...
Last edited by bbcobra; 11-09-2012 at 08:14 PM.