|
||||||||
|
Auto Cross, Drag Racing, Car Show, Awards & Prizes - Register Now! |
||||||||
|
|||||||
MK2 Focus The place to chat about general questions, window tinting, exterior body, interior and lighting upgrades for the second generation 2008-2011 Focus.
|
![]() |
![]() |
|
|
|
Thread Tools | Display Modes |
|
|
#11 | ||||
|
Focus Addict
|
Have you tried using more emoticons when you ask questions? I hear that helps fix electrical problems.
__________________
If you can't wear it out, burn it off |
||||
|
|
|
|
|
#12 | ||||
|
Focus Enthusiast
|
Is it a real bi-xenon kit or no?
Some kits are hid low and halogen high which suck ass Before I did my retrofit I had a $75 set that comes with dual beam bulbs. There weren't 2 hid bulbs or anything, its one hid capsule on a magnetic plate. When you hit high beam the magnet engages and sucks the bulb into the socket a little (like an adjusting flashlight) and focuses the beam and aims it a little higher. Anyways was it ever working? Was it direct plug and play? |
||||
|
|
|
|
|
#13 | ||||
|
Focus Enthusiast
|
Did you ever try swapping the plugs from ballast to bulb and vice versa? Had a similar setup on my last car and that worked. I never blew a fuse though so this may not be applicable/helpful.
__________________
|
||||
|
|
|
|
|
#14 | ||||
|
Boosted HB.
|
Seems like the Magnet for the High beam is using more amperage to engage the Hi beam soleoid. Try using a Relay kit and see if this cause the issue to go away.
__________________
2013 Ford Focus BOOS[ST]ED 2010 Ford Focus "S"edan (11 Psi, GT28RS) - Sold ROTM Nov '11 (2010 Focus S) |
||||
|
|
|
|
| Bookmarks & Social Networks |
| Thread Tools | |
| Display Modes | |
|
|
|
||||