How do i adjust my MACH's ?

Fattie · 09-11-2012, 08:45 PM

i searched. maybe i didnt search hard enough. but can anybody tell me or show me with pictures how i can adjust my mach hid's ? headlights say to refer to manual , but my car is an 05 with svt front end. so no manual.

Sponsor · Advertisement

***1sloho*** · 09-11-2012, 08:51 PM

its easier to actually loosen the lights to do this as, its a lil tight in the engine bay. on the back of the lights, take off the cover. on the inside of the light, u'll see a lil white wheel. if i remember correctly, clockwise raises the beam, counter clockwise lowers.

Fattie · 09-11-2012, 09:51 PM

Quote:

Originally Posted by 1sloho

its easier to actually loosen the lights to do this as, its a lil tight in the engine bay. on the back of the lights, take off the cover. on the inside of the light, u'll see a lil white wheel. if i remember correctly, clockwise raises the beam, counter clockwise lowers.

does this work on both high and low beams ? thanks

SVTFocusOnMe · 09-11-2012, 10:06 PM

I don't recall an adjustment for the high beams. Just wondering, Why would you need to adjust these?

02fordsvt · 09-12-2012, 05:45 AM

Quote:

Originally Posted by Fattie

does this work on both high and low beams ? thanks

Yes, it will adjust both; the high and low beams are both connected on one adjustable holder. However, there are two screws that can be accessed from the top of the lights without having to remove them; they are located at the same places as a conventional first get adjustments. One (I can't remember which anymore) adjust the horizontal and the other adjusts the vertical. Just get you markings on a wall and use those two screws to line them up.

***sleepyboy*** · 09-12-2012, 06:14 AM

It's in the owners manual if you have one with your car. It says you can do it with the headlights in the car but I had to take the drivers side out. I couldn't get the cover on to save my life lol