How to: Aftermarket footwell lighting - Focus Fanatics
Ford Focus Forum
HomeContact UsAbout UsGalleryDiscussion ForumsMarketplace


Go Back   Focus Fanatics > Ford Focus Third Generation > MK3 Interior Mods & Upgrades

MK3 Interior Mods & Upgrades The place to chat about performance gauges, shifter knobs, custom interior paint, car seats or any interior upgrades for the 2012 Focus.

Search This Forum | Image Search | Advanced Search    
Ford Focus Tire & Wheels FocusFanatics Merchandise

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 09-08-2012, 08:46 AM   #1
Chickenmuffn
Focus Enthusiast
 
Join Date: Sep 2012
Fan#: 103458
Location: York, United Kingdom
What I Drive: 2011 Focus Zetec 1.6

Posts: 76
FF Reputation: 9 Chickenmuffn Good Standing Member
Buy-Sell-Trade Rating: (0)
How to: Aftermarket footwell lighting

NOTE: This was done on a Euro 2011 Ford Focus MK3

My Focus didn't come with footwells so I decided to install them today. Took me about 2 hours.

First I located the fuse box which, for my car, was in the left footwell. To access the fuse box there are 2 plastic bolts that hold up a stiff piece of cloth that covers the fuse box. Squeeze and twist them off.



The indicated fuse is a fuse that is activated when the key is in the "ON" position. There should be a 10amp fuse is there, I forgot to put it back in for the picture. I'm using a add-a-circuit fuse tap so that the footwells turn on only when the key is in the ON position



I then threaded some wires behind the center console. I zip tied a twig to the wire and threaded it though the back.


By chickenmuffn at 2012-09-08

Here is the left side LED strip, I soldered the add a fuse to the positive of the LED and soldered some black wire to the GND just to extend it


By chickenmuffn at 2012-09-08

This is the right side LED strip soldered to the wires I threaded eariler


By chickenmuffn at 2012-09-08

Mounted the LED's using double sided tape to underneath the dash, making sure the glove box would clear the strips.


By chickenmuffn at 2012-09-08

Connected the left and right GND wires using a ring connector, and bolted that connector to a metal screw I found underneath the glove box.


By chickenmuffn

The positive wires were solder together and then connect to the add-a-circuit which was theninserted into the above indicated fuse slot.



Cleaned up the wires, reattached the stiff cloth piece and turned the key to the ON position. This was taken in broad daylight. Will take another one tonight.


By chickenmuffn at 2012-09-08


Chickenmuffn is offline  
    Reply With Quote
 

Bookmarks & Social Networks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:31 PM.


Copyright 2002-2014 FocusFanatics.com. All Rights Reserved : Terms of Use : Privacy Policy : Advertise Information : Site Map

Focus Fanatics Ford Focus Forum offers many fun ways for you to engage with other Ford Focus Owners from across the world. Whether it be about the aftermarket performance modifications, technical how-to's, European tuned suspension or awesome fuel economy similar to the Acura TLX or Fiesta ST. You can find all Ford Focus and Focus ST related information here. Join our Ford Focus discussion forums and chat with local Focus enthusiasts in your area.