2012 Focus Rear Diffuser!

[TiStick]

Originally Posted by Deehugh

I cannot find the FRPP version for purchase anywhere online but I would much prefer that if you can find me a link. And I guess it is a technically a valence with a diffuser look...

http://www.partscheap.com/2012-Ford-...arts-s/471.htm

[Deehugh]

Originally Posted by TitaniumStick

http://www.partscheap.com/2012-Ford-...arts-s/471.htm

I was refering to the FRPP spoiler as well, is this ^^^ what you are talking about or is there another location to buy the Ford spoiler

[unida767]

Originally Posted by Deehugh

I was refering to the FRPP spoiler as well, is this ^^^ what you are talking about or is there another location to buy the Ford spoiler

I have it fitted factory to my car fordpartsuk.com are able to provide euro parts you can use my euro Ti vin to help find it, WFOKXXGCBKCB74304

Here it is in Panther (Tuxedo) black



I can't wait to add this rear valance.

[TiStick]

Originally Posted by Deehugh

I was refering to the FRPP spoiler as well, is this ^^^ what you are talking about or is there another location to buy the Ford spoiler

That is the FRPP spoiler. For some reason, it isn't on the Ford Accessories website any longer. Partscheap is the only place I know of in the US for the FRPP version right now.

[dyn085]

Here is the Ford Accessories link-http://www.fordaccessoriesandparts.c...%252d2013.html

It's only $90 more than the partscheap cost

[SterlingArcher]

Originally Posted by TitaniumStick

That is the FRPP spoiler. For some reason, it isn't on the Ford Accessories website any longer. Partscheap is the only place I know of in the US for the FRPP version right now.

Someone can correct me if I'm wrong, but I'm pretty sure the FRPP and the 3DCarbon are the same exact thing. Its called the 'airflow' spoiler by Ford, and my guess is that they will only sell the ST spoiler going forward (very similar, but with squared edges), thus the lack of availability from FoMoCo.

Also, I've seen a few members state that the prepainted options didn't 100% match.

[dyn085]

If they are different, us laymen will probably not be able to tell. That being said, I seem to remember hearing that 3dCarbon supplied Ford with the body kits...not 100% on that info though.

[TiStick]

Originally Posted by SterlingArcher

Someone can correct me if I'm wrong, but I'm pretty sure the FRPP and the 3DCarbon are the same exact thing. Its called the 'airflow' spoiler by Ford, and my guess is that they will only sell the ST spoiler going forward (very similar, but with squared edges), thus the lack of availability from FoMoCo.

Also, I've seen a few members state that the prepainted options didn't 100% match.

I thought I remember reading where either Red or FB said there were "slight" differences between the FRPP and 3D Carbon versions. If I find the post, I'll update this one.

Edit: Finded it!

Originally Posted by FocusBoy58

I have the Ford Racing One and I have seen the 3d carbon it has a slight but noticeable difference in the way the outer spoiler line is. Instead of dipping down slightly on the Ford one it stays flush. You have to see them in person though.

EDIT or maybe because I was on crack or something and wanted to see a difference. But the difference isnt worth any price difference. WHICH EVER IS CHEAPER might be the better thoughts on this subject.

[dyn085]

Originally Posted by TitaniumStick

I thought I remember reading where either Red or FB said there were "slight" differences between the FRPP and 3D Carbon versions. If I find the post, I'll update this one.

Edit: Finded it!

Good find. It would make sense that the two have different, even if slight, differences...

[misfire]

they remind me of the mazdaspeed 3 spoiler