Aem to xcal2 question?

[DEMENTED SVTF]

Ok I know that I have a blue and white wires from the aem wb. And I have 2 analog wires from my modified cable to xcal2. Question is does blue aem go to analog 1 or 2 on the cable. Or do I just use the white one like a xcal3?

[Sponsor]

[1turbofocus]

http://www.focusfanatics.com/forum/showthread.php?t=224269

See if that helps

Tom

[DEMENTED SVTF]

Ok I under stand that the aem wb has one analog out put (white wire). But I have #1 or #2 analog inputs on the xcal2. The white wire goes to which output on the xcal2?

[DEMENTED SVTF]

Or would I be able to switch from analog #1 or #2 on the flasher while logging? And just pick the one that's reading?

[1turbofocus]

Analog 2 use to work the best but I think SCT has made some changes and both work ok now

Tom

[FocusZx3Oh]

Where did you get the cable to connect to the xcal2. I'm trying to data log my aem wideband and need the cable to hook it up

[oknvragain]

Originally Posted by FocusZx3Oh

Where did you get the cable to connect to the xcal2. I'm trying to data log my aem wideband and need the cable to hook it up

I found mine at an old computer parts supply store. It was a total long shot. They actually made me one. LOL.

Your best bet is to start calling around to local computer stores... Don't bother with the big store like best buy or compusa. look for an old hole in the wall store.