Mazda3-5 MS3 MotorMounts Fit 2012 Focus

[Sonic_HedgeHog]

Originally Posted by zx3matt

Sure's mount:

http://www.suremotorsports.com/produ...mance/torq-r3/

I saw that one... I was playing on their site, but duro's weren't listed

[amoosenamedhank]

Originally Posted by TboneZX3

What model year range of the MS3 can I source this mount from? This looks like just the ticket for me.

Mount should be fine from all years 2007-2012+ Just be careful not to get a standard 3 mount if you're thinking of doing the CS inserts. From EVERYTHING that I've read the standard 3 w/ inserts will chatter your teeth out of your head.

[TORQUERULES]

Originally Posted by TboneZX3

What model year range of the MS3 can I source this mount from? This looks like just the ticket for me.

My mount is 2010+. It looks the same as my 2008 mount though.

[TORQUERULES]

Originally Posted by amoosenamedhank

Mount should be fine from all years 2007-2012+ Just be careful not to get a standard 3 mount if you're thinking of doing the CS inserts. From EVERYTHING that I've read the standard 3 w/ inserts will chatter your teeth out of your head.

Not sure about the stock 3 mount, but I had the inserts in my 2008 MS3 and it was perfect. I really mean that. Just perfect.

[TORQUERULES]

I still have to say that just the switch to the stock MS3 rear mount made a huge difference in my car. Much more pleasurable to drive now.

[amoosenamedhank]

Originally Posted by zx3matt

Not sure about the stock 3 mount, but I had the inserts in my 2008 MS3 and it was perfect. I really mean that. Just perfect.

If you look at any aftermarket RMM or even CS inserts... they are the same part number for the 2007-2009 as they are for the 2010-2012+. So any mount from this vintage should work.

No, I have not heard the teeth chattering from the MS3 mount... most people like these. It's the Mazda 3 mount that seems to be no good.

[amoosenamedhank]

Originally Posted by zx3matt

I still have to say that just the switch to the stock MS3 rear mount made a huge difference in my car. Much more pleasurable to drive now.

Well I just said eff it and picked up a OEM MS3 mount for $25 shipped and ordered a set of CS inserts. Not a bad option for $66.

[TORQUERULES]

Originally Posted by amoosenamedhank

Well I just said eff it and picked up a OEM MS3 mount for $25 shipped and ordered a set of CS inserts. Not a bad option for $66.

That is what I thought.

You might want to try it without the inserts first. It is not hard to change and add them later.

[TORQUERULES]

I might have started a trend!

[amoosenamedhank]

Originally Posted by zx3matt

That is what I thought.

You might want to try it without the inserts first. It is not hard to change and add them later.

Too late... the inserts are already ordered.... I figured worst case scenario they shouldn't be too hard to rid off if I hate them.