Massive Crower cams installed 2009 focus, VIDEOS!!

[Wobbn08]

Interested to see gains, as I have the same mods and would like to know the true power increase....

[staticsword]

Originally Posted by PSUrivie

Hey man, post an idle vid. Car is sik!!!

I'll try to throw one up sometime this week.

Originally Posted by Wobbn08

Interested to see gains, as I have the same mods and would like to know the true power increase....

Same here, I need to tune it first, there is not a dyno in my city besides the local chev dealer who holds a horsepower challenge in the summer and allows for free dyno's. So I plan to bring my car by and see what kind of power I am putting down. I will be hoping for around 170hp at least.

[PSUrivie]

^are you doing remote tuning with Tom??

[Texas Ghost]

Originally Posted by staticsword

Don't need anything besides the cams and the timing tool kit if the shop doesnt have one. I did not install them so I do not have any idea how hard it was, but the mechanic said it was pretty straight forward. I have the stage 1, but if you do the stage 2 cams than you need to other things like the spring kit

cool thanks for the info, i didnt wanna save money and buy them to find out i gotta save more money for other parts to get it working.

[staticsword]

Originally Posted by PSUrivie

^are you doing remote tuning with Tom??

Yup, started a few weeks ago, but we ran into a problem where my wrench light kept coming on, may be caused by not being able to disable the knock sensor. Had to send the datalog to SCT waiting for them the reply....

[Slammed_2.0]

idle video please? Im curious now

[09vistabluecoupe]

Originally Posted by Slammed_2.0

idle video please?

[PSUrivie]

I'm curious to know more about the FI cams they offer. I'm not sure how much I could benefit from installing cams. It's a lot of work when you figure you could just turn the boost up.

[felixthecat]

Originally Posted by PSUrivie

I'm curious to know more about the FI cams they offer. I'm not sure how much I could benefit from installing cams. It's a lot of work when you figure you could just turn the boost up.

One look at the stock cam lobes vs the even stage 1's are enough to tell for a N/A car= More duration & lift. Turning up the boost is great if that what you have.

[Slammed_2.0]

Tom, even with the stage 1 cams and YOUR supporting mods will make a good noticable difference. sure stage 2 for boosted applications but youll need whole new head work.