Originally Posted by TitaniumStick
Now for the OT part...
Power Surge, is it true that if the tubing to be bent were filled with sand and then welded closed prior to bending that the ID would be maintained even when drawn over the die? I've always heard that, but never tried it myself.
I highly doubt that would work. Even filled with sand, the pipe will bulge out wherever the tubing is weakest. The sand will still compress anyway, so you'd still wind up with a crimped bend.
2012 Race Red 5-door SE, 18" Ti wheels, Ti headlights/fog bezels, 20% tint, debadged trunk
2002 Sonic Blue SVT - supercharged (sold)
2008 Vista Blue SE (gone)