[:)][:)][:)][:)][:)][:)]NEW Massive GM G-Body Rear Lower control arms![:)][:)][:)][:)][:)][:)]

***K Dog*** · 01-20-2012, 02:47 PM

Massive is proud to release it's newest offerings into the GM G-Body performance market!

G-body= "metric cars" Malibu Monte Carlo Cutlass Regal Grand Prix 78-88

Both Race and street lower rear control arms!!!

Here's what we've got to say about them!

Stock lower control arms on that muscle car of yours are of an extremely flimsy stamped sheet metal construction. Soggy rubber bushings complete the recipe for unwanted wheel hop, deflection and flex.

Massive has created a stronger solution. Huge 1.5” heavy wall steel tubing can harness even the highest HP load with ease. Durable and stable polyurethane bushings transfer your hard earned torque where it belongs – the pavement. Fully TiG welded. Premium thickness powder coating in metallic silver with a prominent Massive logo so people know your using the best. Includes Massive's HARDCORE HARDWARE kit. Only the finest 170,000 PSI Grade 8 bolts with Nylock nuts and plated washers. Strong enough for all power levels and replaces your weak rusted stock stuff.

As usual, these arms are MADE IN THE USA – so you know the quality is as good as it gets.

Get ready to rock your 60 foot times!!!

When your ready to take a true step above the guys in the other lane, the choice is simple – the new Massive RaceSpec series Lower Control Arms! Replaced are all flexible components for the best in accurate torque transfer!

Featuring:

Monster 1.5” .120” wall Alloy steel tig welded body will handle ANY power level. Premium powder coated for good looks and long life.
Billet BIG O.D. Custom machined rod end step bushings – Not off the shelf tiny pieces! Dare to compare! HD construction made just for this purpose where rotary motion is most critical but torque loads are great. Wont let your factory stamped steel brackets twist or bend. BIG HP cars will tear lesser pieces to shreds.
Aurora 3/4in VCAM 21150 lb Load capacity PTFE Composite race spherical rod ends – super strength yet metallic contact isolated – NO NOISE! LONG LIFE! NO LUBRICATION NECESSARY! Years of exhausting research at the race track and on the street have led us to these “cost-no-object” ends!!!
Fully adjustable ON CAR for limitless fine tuning.
Includes Massive's HARDCORE HARDWARE kit. Only the finest 170,000 PSI Grade 8 bolts with Nylock nuts and plated washers. Strong enough for all power levels and replaces your weak rusted stock stuff.
Quality made IN HOUSE right here in the USA!!!