588whp 500tq just got off the dyno :)

[Roushturboedzx3]

Originally Posted by 02_z_x_3

I'm hoping to be a contendor when my car is finished. I secretly just want to outrun my uncles '07 vette.

just a reg c6 or a z06 c6

[PumkinSvt]

good kill! that teg had nothing on you!

[drunkyoda]

you car is slow... XD

lets race.. you get bicycle tires up front and i get drag radials!

you would probably still win

[02_z_x_3]

I believe just a regular c6. He didn't get the zo6 cause of the price difference. I was only hoping for 300 whp at first and then I built the motor so why not use it?

[Roushturboedzx3]

Originally Posted by PumkinSvt

good kill! that teg had nothing on you!

Originally Posted by drunkyoda

you car is slow... XD

lets race.. you get bicycle tires up front and i get drag radials!

you would probably still win

lol i dont think i could let out the clutch with out spinning haha

Originally Posted by 02_z_x_3

I believe just a regular c6. He didn't get the zo6 cause of the price difference. I was only hoping for 300 whp at first and then I built the motor so why not use it?

350-375 you should kill him easily

[02_z_x_3]

I'm hoping for more thaan that. That's why iim trying to sell my turbo to get a bigger one. I'm stuck on a gtx30 or a gt35. My grandpa don't think I can walk the vette. He's old school and thinks 25-30 psi will blow the block apart.

[Roushturboedzx3]

Originally Posted by 02_z_x_3

I'm hoping for more thaan that. That's why iim trying to sell my turbo to get a bigger one. I'm stuck on a gtx30 or a gt35. My grandpa don't think I can walk the vette. He's old school and thinks 25-30 psi will blow the block apart.

Both are good turboes, neither you could go wrong with. pm me and ill see if i can get you a deal. and lol you will only need 18psi and pump gas to walk it.

[PumkinSvt]

Originally Posted by 02_z_x_3

I'm hoping for more thaan that. That's why iim trying to sell my turbo to get a bigger one. I'm stuck on a gtx30 or a gt35. My grandpa don't think I can walk the vette. He's old school and thinks 25-30 psi will blow the block apart.

What turbo are you selling?

Sent from my PC36100 using FF Mobile

[02_z_x_3]

I have a garrett t3/to4e .57 trim with a .63 hotside with a 2.5" v band discharge and a semi polished compressor housing. Would have been good for a stock motor but I built a bottom ende and want as much power as I can get. Ill hit you up when I'm ready jim.

[Roushturboedzx3]

Well not a update that i like but it is a update.

Last sat night i had a heater hose burst on me. I pulled over to the side of the road about 3 feet, and was about to open the door when my buddy said were gonna get hit. A nissan sentra apparently cant drive and clipped the side of my car with there mirror and a little of there body :( here some pics.










And the POS ford prebent heater hose