Driver's Side SVT knuckle, hub & bearing
The knuckle is not in the best shape but I believe it is usable. Basically I sheared the bolt off holding the ABS sensor in. I drilled it out and tapped it to a 1/4-20 but I drilled/tapped it a little off-center from where it was. I personally didn't want to mess with it so I just replaced it with a new knuckle altogether. The bearing in the knuckle is shot, but I have a brand new Timken one I will sell with it. The spindle/hub is brand new. If you want pictures to see if you think you can use it I can get those for you. I will sell the bearing separately (will come with the snap ring as well) but not the hub since I don't have any way to press it out.
I'd like $100 for everything + shipping. If you want just the bearing I'll let that go for $30 shipped (Car Quest wanted $60 for one locally, Rock Auto has them for $15 but none are in stock and last I checked they shipped from the UK so shipping on them was outrageous). I paid $200 for a new knuckle, so if you need on and could salvage this it would save you quite a bit of money.