 |
 |
 |
||||||
 |
|
 |
||||||
|
Auto Cross, Drag Racing, Car Show, Awards & Prizes - Register Now! |
||||||||
|
|||||||
General Forced Induction The place to chat about turbochargers, superchargers and Nitrous systems.
|
 |
 |
|
|
|
Thread Tools | Display Modes |
08-06-2011, 08:38 AM
|
#1 | ||||
|
March 2013 ROTM
 
|
Lets see what this heat maker can do-JRSC build
So I am planning on gathering parts and start building this winter. Been working on a couple things so far.
Current setup: M45 6.5" crank pulley 2.6" blower pulley ZX2 cams COP SVT airbox OBX header/catback FC cam gears E85  List of plans: Head milled and mildly ported Larger valves Replace the M45 with a mildly ported M62 Smaller sc pulley (offset is different for the GM M62, undecided on size) Aluminum flywheel and clutch (undecided on clutch) SVT rods (undecided on pistons) W/M or N2O (DD, but will rarely see high boost) Tube arms (built by me) Traction bars (built by me) Now this is what I have so far Brand new aluminum flywheel  SVT rods and pistons with new rings and bearings installed  And an M62 off a 95 Riviera  The blower is getting stripped down and cut up to fit the JRSC throttle body plate. Will be replacing the bearings, coupling, and seals. Posted via FF Mobile |
||||
|
|
|
Advertisement
|
Remove Advertisements |
|
Focus Fanatic
Fan#: 1
|
|
|
08-06-2011, 08:48 AM
|
#4 | ||||
|
March 2013 ROTM
|
Down to the rotor bearings. Can't cut anymore off.
 I can save about .5" by keeping the GM pulley because of the offset.  The case is still 1.75" longer than my M45. I need things to match up for the bypass valve you can see here.  I should be able to move the assembly toward the belt the other .25" or so. There is plenty of mounting surface on the manifold. Posted via FF Mobile |
||||
|
|
|
|
08-06-2011, 09:41 AM
|
#6 | ||||
|
March 2013 ROTM
|
Also going to be swapping in 4.06 gears, and hopefully a custom L/S diff.
Been eyeing these too https://m.ebay.com/Member/F/ViewItem...40x278&emvcc=0 Posted via FF Mobile |
||||
|
|
|
|
08-06-2011, 01:53 PM
|
#9 | ||||
|
March 2013 ROTM
|
Hell no. That wouldn't be custom. I am planning on replacing the whole diff.
__________________
FocusXtreme - Hatch Nation #96 04 ZX3 5.0, T5, 4 lug 7.5 w/ 3.73s 12 SE Hatch Sport & Winter Package, ST Front End 91 Ranger XLT 3/4 drop 89 Bronco II XLT Well the body is still stock, what's left of it |
||||
|
|
|
|
08-06-2011, 02:26 PM
|
#10 | ||||
|
Shot me 3 deer!!!
|
looks like you got your work cut out for you!
__________________
Group buy, CARBON FIBER bezels till July 28 check in the Group buy section! Owner of Custom Carbon! PM me w/ CF needs! |
||||
|
|
|
|
|
| Bookmarks & Social Networks |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
All times are GMT -5. The time now is 06:32 PM.
 |
|
 |
||
 |
|
 |