Lets see what this heat maker can do-JRSC build

[disciplerocks]

So I am planning on gathering parts and start building this winter. Been working on a couple things so far.

Current setup:
M45
6.5" crank pulley
2.6" blower pulley
ZX2 cams
COP
SVT airbox
OBX header/catback
FC cam gears
E85



List of plans:
Head milled and mildly ported
Larger valves
Replace the M45 with a mildly ported M62
Smaller sc pulley (offset is different for the GM M62, undecided on size)
Aluminum flywheel and clutch (undecided on clutch)
SVT rods (undecided on pistons)
W/M or N2O (DD, but will rarely see high boost)
Tube arms (built by me)
Traction bars (built by me)


Now this is what I have so far

Brand new aluminum flywheel


SVT rods and pistons with new rings and bearings installed


And an M62 off a 95 Riviera


The blower is getting stripped down and cut up to fit the JRSC throttle body plate. Will be replacing the bearings, coupling, and seals.

Posted via FF Mobile

[Sponsor]