I couldnt get my center 02 out

[BowerR64]

Originally Posted by 1turbofocus

In the tune , shoot me an email

Tom

cool! thats going to save me some work. I started reading about the 02 cheater things how they use a resistor to put a load then a cap to create the fake signal and stuff.

[1turbofocus]

Tune sent back

Tom

[BowerR64]

Originally Posted by 1turbofocus

Tune sent back

Tom

Thanks that was quick.

So since i got this error the 2 stock 02 sensors wernt actually turned off?

What would that do to the tune?

Its good to leave them on when they are still mounted in the manifold right? to keep them from failing. My wideband says never to run the sensor in the manifold if its not hooked up and heated.

[FocusedSlayer]

For my 07 I have the 1st and 2nd 02 sensors still in and plugged up but with Tom's Tune he disabled my 3rd sensor and that's where I have my Wideband sensor at . And this is on a Duratec 2.0L .

I got a CEL when I put my Wideband in cause my 3rd 02 sensor was still active and now its disabled and no more CEL :)

[BowerR64]

Originally Posted by FocusedSlayer

For my 07 I have the 1st and 2nd 02 sensors still in and plugged up but with Tom's Tune he disabled my 3rd sensor and that's where I have my Wideband sensor at . And this is on a Duratec 2.0L .

I got a CEL when I put my Wideband in cause my 3rd 02 sensor was still active and now its disabled and no more CEL :)

Did you try the second one first?

[FocusedSlayer]

No I didn't , I also forgot to mention that its on an F2 header .

[BowerR64]

I think ill do the header in a few months. I need a new battery and go threw my fluids tranny, brakes, then exhaust.

Its on my list though.

[BowerR64]

THe other day i removed my battery so i could get to the hole in my firewall my car seems to run different now.

Not sure if its that new tune with the #3 02 disabled or removing the battery but it seems like its running a little better.

I wasnt sure if resetting the ecu after a tune but i think im going start doing it now.

But now its been so long since ive had the wideband in from the last time ive forgot how to get it to log now.

I know ive logged it threw the SCT tuner but i cant remember how i did it.

[BowerR64]

Originally Posted by FocusedSlayer

For my 07 I have the 1st and 2nd 02 sensors still in and plugged up but with Tom's Tune he disabled my 3rd sensor and that's where I have my Wideband sensor at . And this is on a Duratec 2.0L .

I got a CEL when I put my Wideband in cause my 3rd 02 sensor was still active and now its disabled and no more CEL :)

How are you tunning yours with your wideband in the third bung? Im having all kinds of issues.

Originally Posted by FocusedSlayer

No I didn't , I also forgot to mention that its on an F2 header .

well hell

[1turbofocus]

Use the pre cat o2 hole

Tom