How To: 00-04 Antenna Base Replacement (Part Number: XS8Z-18919-AA) - Focus Fanatics
Ford Focus Forum
HomeContact UsAbout UsGalleryDiscussion ForumsMarketplace


Go Back   Focus Fanatics > Ford Focus First Generation > MK1 Focus

MK1 Focus The place to chat about general questions, window tinting, exterior body, interior and lighting upgrades for the first generation 2000-2007 Focus.

Search This Forum | Image Search | Advanced Search    
Ford Focus Tire & Wheels FocusFanatics Merchandise

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 04-18-2011, 01:06 AM   #1
bay_wolf
Focus Enthusiast
 
Join Date: Oct 2010
Fan#: 79215
Location: Rolla, MO
What I Drive: 2002 White Wagon

Posts: 238
FF Reputation: 2 bay_wolf Good Standing Member
Buy-Sell-Trade Rating: (7)
How To: 00-04 Antenna Base Replacement (Part Number: XS8Z-18919-AA)

I realize there is already a how-to on this but I was already doing it and figured I would try to take some better pictures for those who need it. Also, thanks to my girlfriend for her hands in the pictures.

Things you need:
Phillips Screwdriver
T25 Torx Bit Screwdriver
Flat Head Screwdriver
Replacement Antenna Base (Part Number: XS8Z-18919-AA)
Car cleaner (optional)
Car wax (optional)

Steps:

Step 1
Get together all the supplies you need. The car cleaner and wax is up to you if you want to get the part of the car underneath the base cleaned up and protected.

Step 2

Insert your flat head screwdriver into the side of the overhead light closet to the window. There's a little grove to put it in. Just use your screwdriver and ease that side out. From there, just grab the overhead light with your hand and get it the rest of the way out.

Step 3

This is what you should have at this point. Just unplug the two wires that are attached.

Step 4

Use your phillips screwdriver to remove the two screws that are shown above. This will allow you to remove the plastic border of the overhead light area. Once removed there is a metal bar in there that can be pushed aside if needed.

Step 5

Use your T25 Torx Bit Screwdriver and remove the screw shown above when attaches the antenna base to the car/ antenna cable. There is a washer on the screw so be careful when removing as you need that. Here's a picture of it.

Step 6

Now just pull of the old antenna base and this is what you should get.

Step 7(optional)

Clean the area with your car cleaner and then put a coat of wax on the area.

Step 8

Place the new antenna base in the holes and get it lined up. Screw the T25 screw and washer back in while making sure the antenna cable gets attached.

Step 9
Reassemble it in reverse order.



Last edited by bay_wolf; 04-19-2011 at 10:10 PM. Reason: Changed Title
bay_wolf is offline  
    Reply With Quote
 

Bookmarks & Social Networks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:33 AM.


Copyright 2002-2014 FocusFanatics.com. All Rights Reserved : Terms of Use : Privacy Policy : Advertise Information : Site Map

Focus Fanatics Ford Focus Forum offers many fun ways for you to engage with other Ford Focus Owners from across the world. Whether it be about the aftermarket performance modifications, technical how-to's, European tuned suspension or awesome fuel economy similar to the Acura TLX or Fiesta ST. You can find all Ford Focus and Focus ST related information here. Join our Ford Focus discussion forums and chat with local Focus enthusiasts in your area.