emissions testing

[Jgrove998]

Originally Posted by PSUrivie

I just asked Tom the send me a tune file of the same tune I have with the rear o2 ON. I then reinstalled my original o2 using the spark plug fouler trick. I drove around for a few miles to let the system go to a ready status and went back the the shop. Got my new stickers and when I came home I reinstalled my wideband and loaded my original tune.

Had the same idea for when the ST needs emissions done again. Use the fouler trick and have the rear O2 turned back on.

[aTm Beaner]

Originally Posted by Jgrove998

Had the same idea for when the ST needs emissions done again. Use the fouler trick and have the rear O2 turned back on.

wouldn't it be easier just to put the stock tune on, and do the fouler trick?

[Jgrove998]

wouldn't it be easier just to put the stock tune on, and do the fouler trick?

Can't run the stock tune with the turbo, 42lb injectors and 3" MAF housing.

But my car looks bone stock on the outside



Now in the case of just running a header; that would work

[aTm Beaner]

Originally Posted by Jgrove998

Can't run the stock tune with the turbo, 42lb injectors and 3" MAF housing.

But my car looks bone stock on the outside



Now in the case of just running a header; that would work

nice! i just ordered another tune with the o2 sensor disabled, but with the EGR activated. hopefully this works. i also made sure it's the 87 tune. gas is getting outrageous.