Focus RS Build.....For the Occasional Track Day!

[thielt1]

Since I am finally tearing my car down after collecting RS bits since early 2009 I decided I would start the build Thread.

I will be going from here:




To Here:

[Sponsor]

[thielt1]

Build Plans:

OEM RS Parts
-Focus RS Build All Exterior OEM Parts
-RS Engine
-RS Gearbox
-RS Suspension
-RS Gauges

Non OEM
-Team Dynamics Pro 1.2 Anthracite 18x8
-Sachs RS OEM Shocks with Vogtland Springs (Will eventually be running GAZ Coilover Setup)
-Eibach Swaybars
-Full Prothane Kit
-Autopower roll bar
-Hella Mach HID
-Carbon Fiber Hood Painted
-FIA Approved Seats (OMP WRC, Sparco Corsa, Cobra Suzka Pro)
-Airbag Delete and OMP Superquadro wheel
-Shortened Borla Exhaust
-Carbon Front Lip

[ChuckDee]

these type of builds tend to get really costly, so i hope to see this completed! so what have you collected so far?

[thielt1]

Instead of importing the RS door cards I decided to build them.

Stencil


Clamp to hold foam tight for even expansion


Glued and Pinned


Fitted

[thielt1]

Originally Posted by ChuckDee

these type of builds tend to get really costly, so i hope to see this completed! so what have you collected so far?

As far as RS parts go everything but:
-rear quarter mouldings
-Brand New RS Grill (have a perfect rs collection grill and an oem rs grill in need of repair)
-RS Center Console if I decide to use it.

I might be forgetting a small piece or two but for the most part I have everything.

This Project will be completed, I thought long and hard about the late 80's vintage 911 I could have by the time this thing is done. But if I don't build one now chances are the opportunity to own one will be gone.

[Hal3st0rm]

Subscribed! Can't wait to see it completed!

[HilloNative]

man, if you want to focus RS turbo, i have most of the parts, i have been(like you) getting RS bits for the past 3 years, manly turbo and some other parts, i also have the brembo RS calipers. Pm for some pictures or some info if you are interested.

[save_HUTCH]

Vary nice. I cant wait to see the end product.

[thielt1]

The only RS Parts I am interested in are the ones I mentioned above. I already have the brembo calipers and I am going with topspeed for the turbo. Thanks though.

Here is a link to some people who might be interested in your parts -
http://forums.focaljet.com/exterior-...iscussion.html

[warneej]

Wow! So you have all of that??? I'm very impressed and quite excited to see this through!

Hope all goes well!