Headlight/Fog light Restore! (56k stay away) - Focus Fanatics
Ford Focus Forum
HomeContact UsAbout UsGalleryDiscussion ForumsMarketplace


Go Back   Focus Fanatics > Ford Focus First Generation > MK1 Focus

MK1 Focus The place to chat about general questions, window tinting, exterior body, interior and lighting upgrades for the first generation 2000-2007 Focus.

Search This Forum | Image Search | Advanced Search    
Ford Focus Tire & Wheels FocusFanatics Merchandise

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 12-07-2010, 02:17 AM   #1
WiscoGTI
Turböner
 
WiscoGTI's Avatar
 
Join Date: Nov 2009
Fan#: 70225
Location: Watertown, WI
What I Drive: 2002 VW GTI

Posts: 9,362
FF Reputation: 32 WiscoGTI Great Standing Member
Buy-Sell-Trade Rating: (9)
Headlight/Fog light Restore! (56k stay away)

Tools used:
-Cordless drill w/ extra batteries (I went through 3 of them)
-3M Headlight restore kit (Use the instructions!!!)
-Plastx rubbing compound
-Shop rags
-Lots-o-tape
-Spray bottle filled with water
-A good shop stool!

Here she goes..


Before:



After 400-grit:











After 800-grit (forgot to take pictures) and 3000-grit wet sand:



After the rubbing compound:



Success! After one more pass with the 2000-grit wet sand and rubbing compound:









The final product (after a good washing):







The 3M kit really does work! It also ended up being a few bucks cheaper at my local Autozone than buying all the sandpaper and rubbing compound seperately. And it's soooo much easier than doing it by hand. All you need is a cordless drill (as seen in some of the pics.) Although their instructions say to only do one row of tape, just double it up (one strip on top of the other.) But I HIGHLY recommend doing about 3 or 4 rows of tape wide jusssst in case. In order to hit some of the corners, you have to get in very close. And my paint around the headlights ended up catching some 800-grit in a couple places, all because there just wasn't enough tape. And another thing, make sure you're not sanding areas of the headlight that you don't have 100% visual of. It sounds like common sense, but after a while you just don't think about it. In order to hit the bottom lip of the headlight, you really need to get down there and look underneath the sander because I went over the tape without even noticing I was that close. So, just put in the extra 5 minutes for more tape.

Also, I was told this could be done in about 40 minutes..now, either I'm just slow, too anal retentive, or else that is just complete bullocks. I spent well over 2 1/2 hours on this tonight. And I really didn't even get the fog lights as well as I could have. So definitely give yourself some time to complete this.



Last edited by WiscoGTI; 12-07-2010 at 10:15 PM.
WiscoGTI is online now  
    Reply With Quote
 

Bookmarks & Social Networks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:03 AM.


Copyright 2002-2014 FocusFanatics.com. All Rights Reserved : Terms of Use : Privacy Policy : Advertise Information : Site Map

Focus Fanatics Ford Focus Forum offers many fun ways for you to engage with other Ford Focus Owners from across the world. Whether it be about the aftermarket performance modifications, technical how-to's, European tuned suspension or awesome fuel economy similar to the Acura TLX or Fiesta ST. You can find all Ford Focus and Focus ST related information here. Join our Ford Focus discussion forums and chat with local Focus enthusiasts in your area.