Official Carlisle Tree Draggin' list - Page 3

xecutionr · 06-03-2010, 08:31 PM

Got my trees (black ice) at autozone today :) one for the way up, one for the show, one for the way back

khaoz · 06-05-2010, 12:16 AM

Quote:

Originally Posted by kenzx3

Nice LOL! I found mine at the Target right near Carlisle, checked my local one they didn't have it, must be because of their location to the PA Turnpike and I-81

that would be my guess carlisle is trucker central

CorKey723 · 06-06-2010, 11:40 AM

good times on saturday, had tons of fun.

Mr. Bill · 06-06-2010, 06:51 PM

I sort of dragged on the way home, but I didn't do it right and it wasn't visible.
However when we hit traffic in CT I jumped out and put one hanging from my rear wiper! And then I took the one I had on my mirror and tied it to my antenna! That one was a bit short-lived, and got me lots of funny looks..fun times though

carfreak86 · 06-07-2010, 07:53 AM

i went thru 3 trees between the drive friday and by the time i made it to the field sat morning. Dam puddles

Egz · 06-07-2010, 09:53 AM

I checked under mine, and it wasn't visable. Either it came off, or got sucked into the underbody.

sjdwales · 06-07-2010, 10:18 AM

i bet little tree's gross has increased since we started this a year ago

HaveBlue83 · 06-14-2010, 07:19 PM

Post Carlisle, my thoughts......

While HILARIOUS, I couldn't keep the tree's on. I went through 2 and the ST...well, Maybe the tree made it to Michigan??? LOL.

I either need to laminate my trees from the rain, or slow DOWN.

I'll look into laminating them.

ALSO, I picked up my favorite ever tree at the car wash for $1.00:

***kenzx3*** · 06-15-2010, 12:14 PM

I've been thinking about getting some made that are metal that could be painted or coated with different designs, they'd also spark pretty hard core when they drag as well.

Yocrew · 06-15-2010, 02:30 PM

I think the metal would be a little dangerous. I could produce them in 1/4" pvc and printed. They'd sure last a lot longer. And they could be in different shapes.

xecutionr · 06-15-2010, 10:00 PM

Metal would be fine as long as you have a metal loop so it doesnt fly off lol

06-03-2010, 08:31 PM	#25
xecutionr Focus Fanatic Join Date: Apr 2008 Fan#: 55434 Location: Clarksburg, WV What I Drive: 2003 Frost Silver zx3 Posts: 1,701 FF Reputation: 17 Buy-Sell-Trade Rating: (9)	Got my trees (black ice) at autozone today :) one for the way up, one for the show, one for the way back __________________ Zetec Crew #343 1979 Ford F-150 Custom 2003 Ford Focus Zx3 - 112,600 and counting (DD)

06-06-2010, 11:40 AM	#27
CorKey723 Focus Rookie Join Date: Jan 2010 Fan#: 71754 Location: Johnstown, PA, PA What I Drive: 2005 Pitch Black ZX4 ST Posts: 16 FF Reputation: 1 Buy-Sell-Trade Rating: (0)	good times on saturday, had tons of fun. __________________ SEDAN REVOLUTION #124

06-07-2010, 07:53 AM	#29
carfreak86 Focus Enthusiast Join Date: Jun 2009 Fan#: 65778 Location: Whitehall, PA What I Drive: 2002 Twilight Blue ZX3 Posts: 246 FF Reputation: 2 Buy-Sell-Trade Rating: (1)	i went thru 3 trees between the drive friday and by the time i made it to the field sat morning. Dam puddles __________________ Im further behind now then when i started

06-14-2010, 07:19 PM	#32
HaveBlue83 Touch me Join Date: Oct 2003 Fan#: 1358 Location: Croydon, PA, PA What I Drive: 02 SVTF DD, 04 SVTF Bewsted :) Posts: 10,861 FF Reputation: 69 Buy-Sell-Trade Rating: (7)	Post Carlisle, my thoughts...... While HILARIOUS, I couldn't keep the tree's on. I went through 2 and the ST...well, Maybe the tree made it to Michigan??? LOL. I either need to laminate my trees from the rain, or slow DOWN. I'll look into laminating them. ALSO, I picked up my favorite ever tree at the car wash for $1.00: __________________ Hey Tom, your tune SUCKS!!!! Hope u r enjoying my $650!! drifting ever more into the world of DSM's, where Boost and AWD come from the factory.......

06-15-2010, 12:14 PM	#33
*kenzx3* Moderator Join Date: Jan 2007 Fan#: 42651 Location: Bel Air, MD What I Drive: '03 Silver ZX3, '07 Gray SAP ZX3 Posts: 21,164 FF Reputation: 120 Buy-Sell-Trade Rating: (42)	I've been thinking about getting some made that are metal that could be painted or coated with different designs, they'd also spark pretty hard core when they drag as well. __________________ TRASH IN THE WATER 2010: When Foci Invade H2Oi - Ocean City, MD - September 24-26th Presented by: FocusRising.com FOCUS RISING 2010: *The Summer's Best Focus Gathering - Carlisle, PA - June 4-6th* Sponsored by: FSWERKS, Ford Motor Company, Hendricks Design Studio, Golden Mile Performance

06-06-2010, 06:51 PM	#28
Mr. Bill Focus Enthusiast Join Date: Jul 2006 Fan#: 36856 Location: East Lyme, CT, Azerbaijan What I Drive: '02 BFR SVT ZX3, '00 Contour SVT Posts: 504 FF Reputation: 7 Buy-Sell-Trade Rating: (1)	I sort of dragged on the way home, but I didn't do it right and it wasn't visible. However when we hit traffic in CT I jumped out and put one hanging from my rear wiper! And then I took the one I had on my mirror and tied it to my antenna! That one was a bit short-lived, and got me lots of funny looks..fun times though

06-07-2010, 09:53 AM	#30
Egz Sückn' n Blown Join Date: Sep 2003 Fan#: 442 Location: Tappahannock, VA What I Drive: 2003 2.3l ZX3 Posts: 7,475 FF Reputation: 109 Buy-Sell-Trade Rating: (3)	I checked under mine, and it wasn't visable. Either it came off, or got sucked into the underbody.

06-15-2010, 02:30 PM	#34
Yocrew ACTIVE MEMBER Join Date: Mar 2008 Fan#: 54713 Location: NPRFL, United States What I Drive: 02RedSVT #306 Posts: 2,758 FF Reputation: 19 Buy-Sell-Trade Rating: (11)	I think the metal would be a little dangerous. I could produce them in 1/4" pvc and printed. They'd sure last a lot longer. And they could be in different shapes. __________________ Daytona Beach 3 July 30th - August 1st 2010 http://www.focusfanatics.com/forum/showthread.php?p=3316695#post3316695

06-15-2010, 10:00 PM	#35
xecutionr Focus Fanatic Join Date: Apr 2008 Fan#: 55434 Location: Clarksburg, WV What I Drive: 2003 Frost Silver zx3 Posts: 1,701 FF Reputation: 17 Buy-Sell-Trade Rating: (9)	Metal would be fine as long as you have a metal loop so it doesnt fly off lol __________________ Zetec Crew #343 1979 Ford F-150 Custom 2003 Ford Focus Zx3 - 112,600 and counting (DD)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode