so long story short my rear end rubs when i have it loaded so i came up with an idea i got from watching nascar the idea of a spring rubber i used my stock coil spring isolators and cut them so they would be ezer to slide in and out of the spring heres some pix of my before where i cut the isolator and after
BEFORE
HOW I MADE THE RUBBER USEING A STOCK COIL SPRING ISOLATOR
INSTALLED
AFTER
it raised the rear end by about 3/8-1/2 inch and also stiffend up the rear end a little im also going to buy another set of poly isolators and do this to them.
BEFORE
HOW I MADE THE RUBBER USEING A STOCK COIL SPRING ISOLATOR
INSTALLED
AFTER
it raised the rear end by about 3/8-1/2 inch and also stiffend up the rear end a little im also going to buy another set of poly isolators and do this to them.