SVT build Number Plaque - Page 6 - Focus Fanatics
Focus Fanatics Ford Focus Forums
HomeContact UsAbout UsGalleryDiscussion ForumsMarketplace



Go Back   Focus Fanatics > Ford Focus Marketplace > Buy - Sell - Trade > Archive

Archive Archive of all expired Buy-Sell-Trade postings.

Search This Forum | Image Search | Advanced Search    
FocusFest Ford Focus Tire & Wheels FocusFanatics Merchandise

 
 
Thread Tools Display Modes
Old 09-16-2009, 08:49 PM   #51
svt mf
Focus Rookie
 
Join Date: May 2009
Fan#: 65315
Location: brownsville, TX
What I Drive: 03,silver,focus svt

Posts: 21
FF Reputation: 1 svt mf Good Standing Member
Buy-Sell-Trade Rating: (0)
how can i find my build number
svt mf is offline  
   
Sponsored Links
Advertisement
 
Old 09-16-2009, 08:59 PM   #52
Slow03
Focus Addict
 
Slow03's Avatar
 
Join Date: Jul 2008
Fan#: 57763
Location: Lexington, Kentucky, KY
What I Drive: 2003 Vermillion Red SVTF

Posts: 698
FF Reputation: 2 Slow03 Good Standing Member
Buy-Sell-Trade Rating: (18)
Sign me up. 2003 #1606. I also dont like the ZX3 part.
__________________
2003 Vermillion Red SVTF #1606
Slow03 is offline  
   
Old 09-17-2009, 03:13 PM   #53
darkstarmotorsports
Focus Enthusiast
 
darkstarmotorsports's Avatar
 
Join Date: Sep 2008
Fan#: 59343
Location: San Diego, CA
What I Drive: 2003 SVT Focus

Posts: 231
FF Reputation: 1 darkstarmotorsports Good Standing Member
Buy-Sell-Trade Rating: (22)
Quote:
Originally Posted by Slow03 View Post
Sign me up. 2003 #1606. I also dont like the ZX3 part.
1. Cheddar SVT (03 SVTF #1163)
2. darkstarmotorsports (03 SVTF #????)
3. $teve
4. jasper46 (04 SVTF #1278)
5. Everlastingboost (03SVTF #3267)
6. mmllemon
7. BigRed03 (03 SVTF #1943 of 2173)
8. lildudeinacar (03 SVTF #2002 of 3985)
9. Slow03 (03 SVTF #1606)


I will remove the ZX3/ZX5 part
darkstarmotorsports is offline  
   
Old 09-17-2009, 05:17 PM   #54
LongDucDong
Focus Fanatic
 
LongDucDong's Avatar
 
Join Date: Sep 2008
Fan#: 59052
Location: Chicagoland, United States
What I Drive: 2003 SVTF 3 door

Posts: 2,730
FF Reputation: 10 LongDucDong Great Standing Member
Buy-Sell-Trade Rating: (0)
Could I see a shot of the plate it would be on, sans typeface?
__________________
"I will cast you down at the foot of the cross He hung from." -For Today
LongDucDong is offline  
   
Old 09-17-2009, 05:42 PM   #55
darkstarmotorsports
Focus Enthusiast
 
darkstarmotorsports's Avatar
 
Join Date: Sep 2008
Fan#: 59343
Location: San Diego, CA
What I Drive: 2003 SVT Focus

Posts: 231
FF Reputation: 1 darkstarmotorsports Good Standing Member
Buy-Sell-Trade Rating: (22)
Actually any surface will work
darkstarmotorsports is offline  
   
Old 09-17-2009, 06:10 PM   #56
LongDucDong
Focus Fanatic
 
LongDucDong's Avatar
 
Join Date: Sep 2008
Fan#: 59052
Location: Chicagoland, United States
What I Drive: 2003 SVTF 3 door

Posts: 2,730
FF Reputation: 10 LongDucDong Great Standing Member
Buy-Sell-Trade Rating: (0)
Quote:
Originally Posted by darkstarmotorsports View Post
Actually any surface will work
What Im asking is to see a shot of the unfinished product, if available. I see the Mazda ones on the first page, will these be similar? What will the dimensions be? Plastic badge? Steel? Aluminum?

Sorry for the questions, Im just curious and trying to get as much info as I can before I decide to order one. Thanks!
__________________
"I will cast you down at the foot of the cross He hung from." -For Today
LongDucDong is offline  
   
Old 09-17-2009, 06:13 PM   #57
darkstarmotorsports
Focus Enthusiast
 
darkstarmotorsports's Avatar
 
Join Date: Sep 2008
Fan#: 59343
Location: San Diego, CA
What I Drive: 2003 SVT Focus

Posts: 231
FF Reputation: 1 darkstarmotorsports Good Standing Member
Buy-Sell-Trade Rating: (22)
They will be similar with a white background.

Taken from the first page;

Specifications on the badge itself:

3" x 1" 1100 Alloy Aluminum with Brushed/Satin Finish with a hard anodized clear coat.
3M VHB (Very high bond) mounting tape
Strength: 25 lb/in of 90 degree peel adhesion strength (440 N/100mm)

Anodized / Clear Coat Specs:


Mil-P-514
Mil-P-15024D Type H & G
Federal Spec GG-P-455B

Description:

Chemically anodized black and blue dyes followed by a mil spec anodized clear top coat. The result is an image that is chemical resistant, and highly durable for outdoor applications in direct sunlight and in salt water conditions. The plate of metal itself would have to be destroyed to affect the image due to the state of the art manufacturing. Traditional silk screen or printed badges has color that can scratch off with your fingernail, and the colors fade in UV light... These military spec bad boys do not have a raised ink surface and will last a lifetime.

Each badge has been anodized and CNC cut from a sheet of 0.050" aluminum alloy sheet which is very robust. In addition, each badge is backed with 3M 4949 VHB Black foam tape. This is a premium mounting acrylic/rubber-like pad that will allow your badge to mount to your exterior paint, or textured surface plastics. Designed as an exterior fastener to replace rivets, spot welds, and liquid adhesives, 3M VHB is made of a viscoelastic acrylic foam that is energy absorbing with outstanding durability. (UL746C)



The acrylic adhesive is 100% resistant to full submersion in water, salt water, hydraulic fluid, 10w30 motor oil, and glycol antifreeze. 90% resistant to kerosene, 50% resistant to jet fuel, 35% resistant to gasoline, and 5% resistant to MEK (Methyl Ethyl Ketone).

If applied at room temperature, 50% of ultimate bond strength will be achieved after 20 minutes, 90% after 24 hours and 100% after 72 hours. The higher the temperatures, the faster the curing time.
darkstarmotorsports is offline  
   
Old 09-18-2009, 08:51 AM   #58
jrpasmo
Focus Addict
 
jrpasmo's Avatar
 
Join Date: Jan 2004
Fan#: 2866
Location: Bratislava
What I Drive: 02Focus ZTW, 02Focus SVT

Posts: 1,302
FF Reputation: 5 jrpasmo Good Standing Member
Buy-Sell-Trade Rating: (1)
Willl you ship to Europe ? Could you send me cost of everything to my PM ?
Thx
__________________
#4208/4788 Procharged SVT 10PSI : +-270/204 by Focus-Power,
N/A ZTW, 2.2 CRDI AWD Santa Fe MMRacing tuned
jrpasmo is offline  
   
Old 09-18-2009, 09:15 AM   #59
macdiesel
I used to drive this
 
macdiesel's Avatar
 
Join Date: Jan 2006
Fan#: 31579
Location: Chicago, IL
What I Drive: 2010 mazdaspeed3

Posts: 3,300
FF Reputation: 21 macdiesel Great Standing Member
Buy-Sell-Trade Rating: (11)
I'll take one. No zx3 in it though. I have a 2002 #2633 of 4788.
__________________
"When does the zetec kick in"
Asked by a Honda enthusiast
macdiesel is offline  
   
Old 09-18-2009, 11:14 AM   #60
LongDucDong
Focus Fanatic
 
LongDucDong's Avatar
 
Join Date: Sep 2008
Fan#: 59052
Location: Chicagoland, United States
What I Drive: 2003 SVTF 3 door

Posts: 2,730
FF Reputation: 10 LongDucDong Great Standing Member
Buy-Sell-Trade Rating: (0)
Quote:
Originally Posted by darkstarmotorsports View Post
They will be similar with a white background.

Taken from the first page;

Specifications on the badge itself:

3" x 1" 1100 Alloy Aluminum with Brushed/Satin Finish with a hard anodized clear coat.
3M VHB (Very high bond) mounting tape
Strength: 25 lb/in of 90 degree peel adhesion strength (440 N/100mm)

Anodized / Clear Coat Specs:


Mil-P-514
Mil-P-15024D Type H & G
Federal Spec GG-P-455B

Description:

Chemically anodized black and blue dyes followed by a mil spec anodized clear top coat. The result is an image that is chemical resistant, and highly durable for outdoor applications in direct sunlight and in salt water conditions. The plate of metal itself would have to be destroyed to affect the image due to the state of the art manufacturing. Traditional silk screen or printed badges has color that can scratch off with your fingernail, and the colors fade in UV light... These military spec bad boys do not have a raised ink surface and will last a lifetime.

Each badge has been anodized and CNC cut from a sheet of 0.050" aluminum alloy sheet which is very robust. In addition, each badge is backed with 3M 4949 VHB Black foam tape. This is a premium mounting acrylic/rubber-like pad that will allow your badge to mount to your exterior paint, or textured surface plastics. Designed as an exterior fastener to replace rivets, spot welds, and liquid adhesives, 3M VHB is made of a viscoelastic acrylic foam that is energy absorbing with outstanding durability. (UL746C)



The acrylic adhesive is 100% resistant to full submersion in water, salt water, hydraulic fluid, 10w30 motor oil, and glycol antifreeze. 90% resistant to kerosene, 50% resistant to jet fuel, 35% resistant to gasoline, and 5% resistant to MEK (Methyl Ethyl Ketone).

If applied at room temperature, 50% of ultimate bond strength will be achieved after 20 minutes, 90% after 24 hours and 100% after 72 hours. The higher the temperatures, the faster the curing time.
Thanks for the description! VERY informative! Once you get these done, can you send me a photo of the finished product, please?
__________________
"I will cast you down at the foot of the cross He hung from." -For Today
LongDucDong is offline  
   
 

Bookmarks & Social Networks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
SVT Build Number phocusphreak SVT Performance (2002-2004) 10 01-10-2009 02:54 PM
2009 Ford Focus Coupe Unveiling at 12:01AM EST Tom Ford Focus & General Car Chat 97 05-13-2008 06:34 PM
SVT owners: build number decal on bumper like Saleens? RedSVT 03 SVT Performance (2002-2004) 7 04-06-2005 09:19 PM
Damn I hope things work out for SVT! TORQUERULES Ford Focus & General Car Chat 7 12-16-2004 11:49 AM


All times are GMT -5. The time now is 05:44 AM.


Copyright 2002-2014 FocusFanatics.com. All Rights Reserved : Terms of Use : Privacy Policy : Advertise Information : Site Map

Focus Fanatics Ford Focus Forum offers many fun ways for you to engage with other Ford Focus Owners from across the world. Whether it be about the aftermarket performance modifications, technical how-to's, European tuned suspension or awesome fuel economy similar to the Acura TLX. You can find all Ford Focus related information here. Join our Ford Focus discussion forums and chat with local Focus enthusiasts in your area.