"The Official/Unofficial SVT Header Conversion Guide"

[thfc1799]

couple of people asked me what the white wrap with black HT Silicone looks like so I figured I'd share some pics...

[thfc1799]

[thisdude_05]

Originally Posted by YellowZX3

I'm not too familiar with the SVT set-up. My question is will a ZX3 flex-pipe bolt up to the RT high flow cat? Or is the flex a SVT version in the picture?

The ZX3 flexpipe from Trubendz WILL bolt right up to the RT cat. I know because I did it.

[FocusStrider]

what about stock EGR tube.. will it work or no? and i know the PS line can be bent farther or buy a SVT PS line..

[thisdude_05]

Originally Posted by FocusStrider

what about stock EGR tube.. will it work or no? and i know the PS line can be bent farther or buy a SVT PS line..

Well considering that the SVT header KIT comes with a modified EGR bung to accomodate your stock egr, then I would say yes. But I'm not 100% sure on that because my kit came with a new EGR tube.

[lildisco]

No the EGR Tube is different. That's why they give you another one in the kit.

[FocusStrider]

ok, what if I buy the SVT header that doesnt come with a EGR bune.. what am i going to do.. disable it or weld the bung in but will it cause CEL to come on if I weld the bung in the SVT OEM header?

[thisdude_05]

Originally Posted by FocusStrider

ok, what if I buy the SVT header that doesnt come with a EGR bune.. what am i going to do.. disable it or weld the bung in but will it cause CEL to come on if I weld the bung in the SVT OEM header?

If you buy one without it yes you would have to delete it or weld a bung in. But if you plan on not deleting the EGR then just buy the kit from Mike at Hilbish. It already comes with everything you need to just bolt on and swap egr tubes.

[FocusStrider]

what about weld a bung in.. will it turn CEL on.....?


Yeah I thought about telling my friend I would just want the SVT cat instead and buy the Header kit from Mike since I dont plan on deleting the EGR.

[faster_than_u]

where did everyone get the gasskets for this? i have the gasket for the header to the head. but where would i get the rest of them??