How To: Lock Switch Lights (SVT) - Focus Fanatics
Ford Focus Forum
HomeContact UsAbout UsGalleryDiscussion ForumsMarketplace

Go Back   Focus Fanatics > Ford Focus First Generation > MK1 Interior Mods & Upgrades

MK1 Interior Mods & Upgrades The place to chat about performance gauges, shifter knobs, custom interior paint, car seats or any interior upgrades for the 2000-2007 Focus.

Search This Forum | Image Search | Advanced Search    
Ford Focus Tire & Wheels FocusFanatics Merchandise

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 11-20-2006, 10:11 PM   #1
FF's Quadriplegic!
Rudel's Avatar
Join Date: Sep 2004
Fan#: 13465
Location: Tampa, United States
What I Drive: 2.3 ATX-RSVT

Posts: 2,882
FF Reputation: 15 Rudel Great Standing Member
Buy-Sell-Trade Rating: (17)
How To: Lock Switch Lights (SVT)

Tools you will need:
  1. Solder Iron
  2. Solder
  3. Pliers
  4. Wire Stripper
  5. 16-18 Gauge Wire (Threaded)
  6. 1/4 Wratchet
  7. 1/4 Wratchet Extention
  8. T-20 Torx Bit
  9. Power Source Detector (Clear Orange Thing)
  10. Zip Ties

Begin by using the 1/4 wratchet with the extention and T-20 torx bit and unscrew the bolt that is holding the door handle, lock, and switches.

Once that is done, pull on the face plate until it comes off. It may take some M.A.N.

Now take about 4 peices of wire, 8in each, and strip the ends about 1/4" inch, and start to twist the threaded end.

Now tin the ends of them so they will not bird-cage on you when they are pushed into the socket terminals.

For the following instructions there is no need to do any more soldering, all you have to do us snug the wire into the back of the sockets with the other wire(s). After that zip tie them so they are not all dangling around.......

On the back of the socket for the window switch do the following:

Put the ground (blue) wire into socket 1, with the Black Wire
NOTE: Passenger side is socket 4, with the Black Wire

Put the Hot (red) wire into socket 10, with the Blue/Green Wire
NOTE: Passenger side is socket 2, with the White/Green Wire

On the back of the socket for the lock switches do the following:
Put the ground (blue) wire into socket 4, which is the LED Ground.
Put the Hot (red) wire into socket 5, which is the LED 12V Supply.

And the outcome!

Here is a diagram incase you need more reference:

513whp on Race Gas; Tuned by
Pump gas? Ppffff!

Part III: Install Handicap Driving Controls
Ma Cah:
Rudel is offline  
    Reply With Quote

Bookmarks & Social Networks
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 07:12 PM.

Copyright 2002-2014 All Rights Reserved : Terms of Use : Privacy Policy : Advertise Information

Focus Fanatics Ford Focus Forum offers many fun ways for you to engage with other Ford Focus Owners from across the world. Whether it be about the aftermarket performance modifications, technical how-to's, European tuned suspension or awesome fuel economy similar to the Acura TLX or Fiesta ST. You can find all Ford Focus and Focus ST related information here. Join our Ford Focus discussion forums and chat with local Focus enthusiasts in your area.