need help finding bolt patter adapters!!!!!

[ToreadorFocus]

lookin to go from 4x114.3 to 5x120.7 someone please help i cant find anything

[Buickboy]

http://www.motorcitybolton.com/wheel...-adapters.html

These guys seem to have them but that's probably a terrible idea seeing as they are 2"

Are these going on a Focus? If so you have a 4x108 bolt pattern

[ToreadorFocus]

wow i feel stupid hahahaha i new that my bad

[ToreadorFocus]

still not havin luck finding 4x108 to 5x120.7

[xxMichaelAnthony]

Go to a machine shop and have them drill your drums and hubs.

[ToreadorFocus]

wat do u mean drill my drums and hubs

[xxMichaelAnthony]

They can drill a second bolt pattern and put studs in like so

[bluebullet]

Originally Posted by xxMichaelAnthony

They can drill a second bolt pattern and put studs in like so

Never thought about that! I was looking at buying adapters


Sent from jeremy's iPhone using FF Mobile

[xxMichaelAnthony]

There is a few people on her who have done it. HTP offered it as a service when they were around.

[Nickgt40]

A 4 lug pattern to 5 lug pattern adapter will be a minimum of 35mm thick as it has to be a two piece unit.

Also, you'll likely have to change out your wheel studs to shorter units, because the stock ones could come into contact with the outer piece of the adapter.

Adaptec Speedware can do it, but plan to give them ~$400.

What BMW/Chevy wheels are you trying to fit? Most don't exactly have favorable offsets for a focus because they are set up for RWD not FWD.