Help!!!

[avilla61]

So i have a 06 focus and my car shakes alot in drive & reverse and not that much in neutral at a red light so im guessing my motor mounts are bad

yesterday i found a bolt on the floor under the car i found out the bolt was from the intake manifold im thinking it got loose with all the shaking but when i was checking were the bolt was from i found a cable not connectend i really dont know what is it for

[felixthecat]

In the 1st pix, looks like that bracket is cracked, or the sheet metal is tore. As far as motor mounts= w/ the hood up & someone w/ their foot on the brake & a little bit of throttle, is the motor rolling upwards or backwards ? Or try this= Have them hold the brake & move the shifter from reverse & drive & whatch, & check for the motor rolling back & forth. How is the dogbone? How many miles? Hows the motor run?

[avilla61]

Originally Posted by felixthecat

In the 1st pix, looks like that bracket is cracked, or the sheet metal is tore. As far as motor mounts= w/ the hood up & someone w/ their foot on the brake & a little bit of throttle, is the motor rolling upwards or backwards ? Or try this= Have them hold the brake & move the shifter from reverse & drive & whatch, & check for the motor rolling back & forth. How is the dogbone? How many miles? Hows the motor run?

its not sheet metal on the firts pic its some kind of tape lol
it has 90k miles motor runs great its just the shaking and well that bolt and the cable

[avilla61]

Originally Posted by felixthecat

In the 1st pix, looks like that bracket is cracked, or the sheet metal is tore. As far as motor mounts= w/ the hood up & someone w/ their foot on the brake & a little bit of throttle, is the motor rolling upwards or backwards ? Or try this= Have them hold the brake & move the shifter from reverse & drive & whatch, & check for the motor rolling back & forth. How is the dogbone? How many miles? Hows the motor run?

i just made this video really quick to show you the car the mileage the engine and well the cable thats not connected ooh and the bolt
sorry if i dont talk but i dont like to lol


http://www.youtube.com/watch?v=w_XNu7EBb7g

[felixthecat]

Take a lite down that runner on the intake & see if the thats where the bolt goes, as a manifold bolt goes down there.

[avilla61]

Originally Posted by felixthecat

Take a lite down that runner on the intake & see if the thats where the bolt goes, as a manifold bolt goes down there.

What do u mean

[felixthecat]

In the video you have your finger by the 2 intake runners on the passenger side. Take a flashlight or pen light between the 2 intake runners on the passenger side & see if its missing the bolt.

[avilla61]

Originally Posted by felixthecat

In he video you have your finger by the 2 intake runners on the passenger side. Take a flashlight or pen light between the 2 intake runners on the passenger side & see if its missing the bolt.

It is missing the bolt down there but I can't put it back because I don't have the tools
so where do u think the cable goes? Or what is it?

[Grumpy]

That's the knock sensor and it's attach bolt. Reinstall it. What is the RPM when the engine is warmed up?

[avilla61]

Originally Posted by Grumpy

That's the knock sensor and it's attach bolt. Reinstall it. What is the RPM when the engine is warmed up?

this is not my cluster as u can see but just to give u an idea of where the rpms are when warmed up



thats exacly where they are