New 2010 headliner with rear lamp

[VonKrause]

Ok I just got a new to me headliner out of a 2010 with the back seat dome light hole, I am going to be getting the dome itself soon and need to know which wedge bulb it takes so I can get the right ones off of http://www.superbrightleds.com/.

Got all the wiring done and the headliner in, also added additional wire for a future puddle lamp install.




-VonKrause

[Red Jay 918]

i have 2 of these in my fronts..

http://www.superbrightleds.com/morei...edge-base/200/

and a brighter one for the rear

[VonKrause]

Are the wedge bulbs the same for the front and back?

Also anyone know which bulbs go in the license plate sockets?

[GN Prime]

Originally Posted by VonKrause

Also anyone know which bulbs go in the license plate sockets?

http://store.42draftdesigns.com/145v...-LED_p_32.html

this is what i have:) if u need a pic or two let me know!

[Miller88]

I had no idea mine had a rear light ... Just noticed that after looking at this thread

[DarderSauce]

I plan on doing this once I find a parts car that has it. How hard was the install/was the wiring just plug and play?

[indy_11]

Originally Posted by VonKrause

Are the wedge bulbs the same for the front and back?

Also anyone know which bulbs go in the license plate sockets?

yes and like red jay said, get a brighter one for the rear with the most leds

and it should be some 39mm festoon bulb....and they def work better than the 42draftdesign ones.

[indy_11]

oops. double post.

[sleepyboy]

Gosh darn it I just did my license plate bulbs but can't remember what they were. Of course it could be different for your year model. Can't you just enter what year and make you have the web site takes to the the bulbs that fit the car, it did for me?

[VonKrause]

Didn't know that was on there, checked and it brought up bulbs for your car Paul. I have wedge bulbs in my dome lights and pretty sure the plate lights are that way too.