For Sale: Turbo Starter Kit.

SaleenT121 · 10-24-2012, 10:53 AM

Im just gathering interest right now and giving potential buyers a heads up.
Im upgrading my turbo focus so im going to offer my old setup minus the charge pipes and intercooler to anyone interested in a turbo setup. This bolts on to your factory exhaust, all you will need is your own routing of charge pipes. Im asking 800.00 Shipped

Specs:
-TD04H MHI Turbo 15G (new unused CHRA) basically new turbo
-Ported IWG housing (used)
-exotic speed compressor housing (used)
- T2 log style manifold
- Downpipe with block off plate (can use a electric cutout if u want)

Available about the end of NOV.

If interested post up or contact me:

PM/SaleenT121
Birmingham, AL
email: ab3dfx22@yahoo.com

This is my dyno Sheet... and that is a spike, not 400tq. Turbo is rated at 250hp. I made 259 and 288 at the wheels with a cutout!

xRESSLERxZX3x · 10-24-2012, 11:50 AM

Definitely interested what does the kit include
Posted via FF Mobile

SaleenT121 · 10-24-2012, 02:27 PM

Quote:

Originally Posted by xRESSLERxZX3x

Definitely interested what does the kit include
Posted via FF Mobile

Turbo manifold+ turbo+ downpipe. I may include oil lines and oil return and bolts.
Ill double check my parts and update this with pics.

Also open to offers or Trades, and this fits the Duratec only.

chaz493 · 10-26-2012, 01:08 PM

Very Interested, Another Saleen here! What else would i need to make this work? Tuning solution?

SaleenT121 · 10-26-2012, 02:30 PM

Quote:

Originally Posted by chaz493

Very Interested, Another Saleen here! What else would i need to make this work? Tuning solution?

What you would need:
-tuning (which tuner u prefer use)
-Xcal 2 or 3 (may have one for sale soon also)
- Intercooler pipes and/or intake pipes if u dont wanna use an intercooler.
-Drain hose
-blow-off valve
-injectors 39 or 42's
-boost gauge
-autolite 103 1 step colder plugs

Also included:
-braided steel feed line (found it) new unused
-bolts M12 X 1.25 and studs

Im gonna add as much as i can if i have extra parts to make it a great buy.

chaz493 · 10-26-2012, 02:35 PM

Quote:

Originally Posted by SaleenT121

What you would need:
-tuning (which tuner u prefer use)
-Xcal 2 or 3 (may have one for sale soon also)
- Intercooler pipes and/or intake pipes if u dont wanna use an intercooler.
-Drain hose
-blow-off valve
-injectors 39 or 42's
-boost gauge
-autolite 103 1 step colder plugs

Also included:
-braided steel feed line (found it) new unused
-bolts M12 X 1.25 and studs

Im gonna add as much as i can if i have extra parts to make it a great buy.

Cool man well i have an Xcal 3 already so ill just have to get a new tune. How much daily driven power do you think this setup will provide? And will i also need better clutch im assuming?

SaleenT121 · 10-27-2012, 07:31 AM

Quote:

Originally Posted by Jerryillz07

seems like a good deal. How safe is running this with stock internals?

This is a small turbo with the wastegate set at 8-10 psi. Its the most you can do on a stock setup. i ran this for years with out issue.

Quote:

Originally Posted by chaz493

Cool man well i have an Xcal 3 already so ill just have to get a new tune. How much daily driven power do you think this setup will provide? And will i also need better clutch im assuming?

It depends on how you drive and the efficiency of the setup. I didnt need one till i opened the cutout. Your Saleen exhaust will keep your power in check and you should be fine clutch wise. The more you drag race it the faster it will wear.

DarderSauce · 10-31-2012, 01:11 PM

Also wondering if this would fit the second gens (2008+ 2.0 Duratech)?

If so, anything special you would need to do on top of getting the parts that aren't included?

Thanks!