 |
 |
 |
||||||
 |
|
 |
||||||
|
Auto Cross, Drag Racing, Car Show, Awards & Prizes - Register Now! |
||||||||
|
|||||||
MK2 Focus The place to chat about general questions, window tinting, exterior body, interior and lighting upgrades for the second generation 2008-2011 Focus.
|
 |
 |
|
|
|
Thread Tools | Display Modes |
|
|
09-24-2012, 09:54 PM
|
#1 | ||||
|
Focus Rookie
 |
Rear sway bar end links and bushings.
I have a 2009 coupe and I was wanting to replace the rear sway bar end links with some poly ones. I was also looking at replacing the bushings, but when i look around at some of the different sites they dont seem to have what i am looking for. So i was wondering if these would work for our years of car?
http://focus.c-f-m.com/prothane20mmr...cusexcsvt.aspx |
||||
|
|
|
Advertisement
|
Remove Advertisements |
|
Focus Fanatic
Fan#: 1
|
|
|
09-25-2012, 07:06 AM
|
#3 | ||||
|
Panamasian
 
|
the bushings should work. we have a 20mm bar. as for the endlinks im not too sure. but i bought endliks for an asvt and they work so who knows
__________________
2011 Blue Flame Focus SES #011 December 2011 ROTM Winner! :) I always take a poo before driving to reduce weight and increase performance you tell me your auto is fun to drive, I laugh in your face. |
||||
|
|
|
|
10-08-2012, 09:57 AM
|
#4 | ||||
|
Focus Enthusiast
 |
Sugested solution
What I did with my ford aspire was I went to Moog's web site and found their p/n and went to NAPA's web site and converted the p/n and then call the counter for a stock check. This was for lower control arm bushings but I had them in my hand in about two and a half hours start to finish. I am not endorsing either of these vendors just trying to offer a method to resolve your problem.
|
||||
|
|
|
|
10-08-2012, 02:20 PM
|
#5 | ||||
|
Focus Addict
|
I don't suppose anyone would know where I could get a set of Bushing Brackets would they... Not to hijack the thread or anything. Here is an idea of what I am looking for... Greasable would be tits.
 Brackets by DarderSauce, on Flickr ^^ Can't really seem to find any that I KNOW will work. Oh btw, my swaybar is 20mm
__________________
If you can't wear it out, burn it off 
|
||||
|
|
|
|
10-10-2012, 08:20 AM
|
#6 | ||||
|
Focus Addict
|
Ford Mo Co
__________________
 Sedan Revolution Two Three Zero FRPP, Debadged, Lots of plans, little time, zero money... |
||||
|
|
|
|
10-10-2012, 08:24 AM
|
#7 | ||||
|
Focus Addict
|
Quote:
__________________
If you can't wear it out, burn it off
|
||||
|
|
|
|
10-10-2012, 08:35 AM
|
#8 | ||||
|
Focus Addict
|
Yeah I do not believe they are greasseable. BUTTTTT..... if you go to a hardware store and get the zerk fittings, you can just drill and tap them and BAM, greaseable
__________________
Sedan Revolution Two Three Zero FRPP, Debadged, Lots of plans, little time, zero money... |
||||
|
|
|
|
10-10-2012, 08:41 AM
|
#9 | ||||
|
Focus Addict
|
Quote:
__________________
If you can't wear it out, burn it off
|
||||
|
|
|
|
10-10-2012, 08:45 AM
|
#10 | ||||
|
Focus Addict
|
Sometimes we gotta be resourceful
 Hope that helps
__________________
Sedan Revolution Two Three Zero FRPP, Debadged, Lots of plans, little time, zero money... |
||||
|
|
|
|
|
| Bookmarks & Social Networks |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Hybrid Mode
|
|
All times are GMT -5. The time now is 11:19 PM.
 |
|
 |
||
 |
|
 |