 |
 |
 |
||||||
 |
|
 |
||||||
|
Auto Cross, Drag Racing, Car Show, Awards & Prizes - Register Now! |
||||||||
|
|||||||
| Massive Speed Discuss about force induction upgrades and performance tuning for your Ford Focus. Sponsored By: Massive Speed
|
 |
 |
|
|
|
Thread Tools | Display Modes |
|
|
06-16-2010, 10:56 PM
|
#1 | ||||
|
Focus Fanatic
 
|
Fuel Rail Adapter
Will your guys' adapter work on my 09??
http://massivespeedsystem.com/_massi.../i-252294.aspx Can I use the extra port to run my fuel pressure safety switch?? Thanks!!!
__________________
FR '11 FF Mod pick FR '12 Carlisle Nifty Fifty Award/Best in Boost/Best 08-11/Finest 5 Pick FR '13 Carlisle 1st Place Award 08-11 Focus/1st place 08-11 Focus (FR13 award)/FSWerks pick/Ford Racing pick/Finest 5 pick/Top pick in the finest 5 |
||||
|
|
|
06-17-2010, 08:30 AM
|
#2 | ||||
|
FF Affiliate
 
|
Should go right on! As long as ur fuel pressure safety switch is/can be adapted to 1/8" NPT, this would work perfect for you.
|
||||
|
|
|
|
06-17-2010, 12:29 PM
|
#3 | ||||
|
Focus Fanatic
|
Sweet! Thanks!!!!
__________________
FR '11 FF Mod pick FR '12 Carlisle Nifty Fifty Award/Best in Boost/Best 08-11/Finest 5 Pick FR '13 Carlisle 1st Place Award 08-11 Focus/1st place 08-11 Focus (FR13 award)/FSWerks pick/Ford Racing pick/Finest 5 pick/Top pick in the finest 5 |
||||
|
|
|
|
06-17-2010, 12:56 PM
|
#4 | ||||
|
Focus Enthusiast
|
not to hate on massive or any thing. But check the length of the bolts that come with it before putting it on. mine were to short and wouldnt even reach the tabs on the fuel rail.
__________________
05 gutted hatch M88A1 recovery vehicle |
||||
|
|
|
|
06-17-2010, 05:01 PM
|
#5 | ||||
|
Focus Fanatic
|
^^^thanks for the tip!
__________________
FR '11 FF Mod pick FR '12 Carlisle Nifty Fifty Award/Best in Boost/Best 08-11/Finest 5 Pick FR '13 Carlisle 1st Place Award 08-11 Focus/1st place 08-11 Focus (FR13 award)/FSWerks pick/Ford Racing pick/Finest 5 pick/Top pick in the finest 5 |
||||
|
|
|
|
06-25-2010, 10:34 AM
|
#6 | ||||
|
Focus Fanatic
|
Hey Karl, quick question. I received the fuel rail adapter today for my 09 N2o build. I'm not sure how it attaches to my rail. Do I not need to use the flange part of the adapter where the screws go through and just plug the center section of the adapter into the side of the rail? Thanks!!! The adapter is awesome by the way....and thanks for the Massive sticker!!!
__________________
FR '11 FF Mod pick FR '12 Carlisle Nifty Fifty Award/Best in Boost/Best 08-11/Finest 5 Pick FR '13 Carlisle 1st Place Award 08-11 Focus/1st place 08-11 Focus (FR13 award)/FSWerks pick/Ford Racing pick/Finest 5 pick/Top pick in the finest 5 |
||||
|
|
|
|
06-25-2010, 11:09 AM
|
#8 | ||||
|
Focus Fanatic
|
^^hey man don't see a pic
__________________
FR '11 FF Mod pick FR '12 Carlisle Nifty Fifty Award/Best in Boost/Best 08-11/Finest 5 Pick FR '13 Carlisle 1st Place Award 08-11 Focus/1st place 08-11 Focus (FR13 award)/FSWerks pick/Ford Racing pick/Finest 5 pick/Top pick in the finest 5 |
||||
|
|
|
|
06-25-2010, 11:11 AM
|
#9 | ||||
|
FF Affiliate
|
Pic works for me, and thats the perfect install. Looks great. As shown there, the stock FPS sandwiches the adaptor.
|
||||
|
|
|
|
06-25-2010, 11:14 AM
|
#10 | ||||
|
Focus Fanatic
|
yeah I got it now....but here's the problem...I don't have that adapter on my rail. the 08+ doesn't have the fuel pressure sensor on the rail. I'm wondering if I could just get an older rail that has that pressure mount on it???
__________________
FR '11 FF Mod pick FR '12 Carlisle Nifty Fifty Award/Best in Boost/Best 08-11/Finest 5 Pick FR '13 Carlisle 1st Place Award 08-11 Focus/1st place 08-11 Focus (FR13 award)/FSWerks pick/Ford Racing pick/Finest 5 pick/Top pick in the finest 5 |
||||
|
|
|
|
|
| Bookmarks & Social Networks |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Hybrid Mode
|
|
All times are GMT -5. The time now is 08:05 PM.
 |
|
 |
||
 |
|
 |