Whats your sway bar set up

[eliaslincoln]

Just wondering what your guys' sway bar and or suspension set ups are.
and if you race in scca i'd like to know your class.
thanks

[wrc_fan]

I currently run in SCR and CCR regions of SCCA. Last year I ran STS (now ST), and finished 2nd for the year. This ST car had the Roush suspension kit with stock FSB and 22mm RSB.

Currently I building a car for FSP, and I plan to run Koni dampers, H&R Race springs, LCR camber plates, 22mm FSB, and 25mm adjustable RSB.

[Blackcatn2o]

Im running roush springs with koni adjustable, I also have the H&R 24mm front sway an I have to renforce the rear frame for the 28.6mm.

[WD40]

SCCA Class - ST (used to be STS, it's changed to ST in 2009)
Dampers - Koni Sport
Springs - Koni Sport
Camber Plates - LCR(Street)
Rear sway - Progress 22mm
Front sway - Stock SVT

[focusedaddiction]

scca class: SM
dampers: KYB AGX
springs: H&R race
Front sway: stock 21mm
rear sway: 22mm progress

[killer ZETEC]

class sts. or st now i guess.
full eibach pro kit with poly mounts, and moog endlinks
simple reliable and hard to break

[Honda Hunter]

Originally Posted by killer ZETEC

class sts. or st now i guess.
full eibach pro kit with poly mounts, and moog endlinks
simple reliable and hard to break

What's a moog endlink?

Thanks.

[egbertnr]

Originally Posted by Honda Hunter

What's a moog endlink?

Thanks.

Moog is an aftermarket endlind that is way beefier looking then the stocks. I would suggest them if you ever replace yours, i Plan to...I am running the saleen/eibach suspension on my SVT which is an Eibach pro kit with rear sway bar from the kit and a stock SVT front sway bar....NIce ride still and handles a little better then stock svt....as far as scca class, I am afraid to ask when I tell them what I have under the hood.

[SVT_underpressure]

I run on Toya RA1's - R compound tires.

Suspension - KW/variant II coilovers
FWB - factory
RSB - 28.6mm
Camber plates up front
Camber adjustable arms in rear

Looking for that magic balance of oversteer.

I see there are a few running the rear 28.6 mm bar...how is it working for you guys? - 1st time it sawed thru my lower control arms...bummer!

egbertnr - Mazda Speed 6 - nice ride...how do you find the clutch?

[gregor_42]

Stock baby...thats how I role...for now lol