let me know how this goes, I was thinking for a long time about doing it too but i am hesitant, I got a motorcycle engine that im will be trying plasma spark on this summer probably though =)[headbang]
This is a picture (not completely wired) of the HHO installed in the engine compartment. It is sitting on a fabricated base and bracket. Also, here is the wiring diagram for it, I bought everything off Ebay for around $30, and yes, it's like a hydrogen injection kit.
After all is installed all you need to get is DISTILLED WATER (gallon jug goes a long way) and a box of BAKING SODA (only use 1/4 to 1/2 teaspoon or you will have a major meltdown like I did (see picture below), notice the plexiglas on the top notch, too much baking soda caused more juice than needed, melted the notch and made contact with the negative side)
The PCV hose hooks up about 6" below the throttle body if that is what you are asking. It is 5/8" diameter and reduces to 1/2" on the other end where it connects to the pipe that goes under the ignition coil.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Focus Fanatics Forum
5.8M posts
189.1K members
Since 2003
A forum community dedicated to Ford Focus owners and enthusiasts. Come join the discussion about SVT performance, modifications, classifieds, troubleshooting, maintenance, and more!