Thanks for the information. What I have found so far is that the taillight bulb holders seem kind of crispy and brown although there is no sign of water leakage. I cleaned the contacts and bulbs and re-installed everything although that didn't solve the problem -- I am still blowing the fuse. It seems to be really sporadic at this point, my wife can drive for a week with no problems, then she'll get in the car and fuse 32 will blow. Other times every fuse inserted blows immediately. I am trying to get it so that it is consistently blowing fuses so that I can unplug everything on that circuit, and plug everything back in one by one until the fuse blows. I also think that I am going to change out the tailight bulb hoders, I'll check the ground while I am at it. Anyone know the locations of the chassis ground points?