Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum - View Single Post - New Project: SVT header (56K change your oil)
View Single Post
Old 08-30-2005, 06:16 PM   #1
kenpokid
Focus Fanatic
 
kenpokid's Avatar
 
Join Date: Jun 2004
Fan#: 9775
Location: Media, PA
What I Drive: 2002 CD Silver ZX3, 1993 Coral Reef Blue 5.0 LX Coupe Mustang, 2005 Windveil Blue V6 Mustang

Posts: 1,999
FF Reputation: 1 kenpokid Good Standing Member
Buy-Sell-Trade Rating: (2)
New Project: SVT header (56K change your oil)

Hey everyone, just giving an update on some things I am doing and plan on doing. I recently bought the SVT Header Kit + RT Highflow cat USED from a guy on here who bought it from McNews. It has about 4K on it and was in very nice shape when I got it. The plan is since Jet Hot is expensive and in my opinion not really worth the money, that the header will get a few coats of rust resistant, high temp (800 degrees constant) and then header wrap. Now I know what most of you will say. "header wrap causes moisture and leads to rust." It might be true, but my dad has wrap on his exhaust on his 03 Cobra and has had no problems, the stuff works. The coating for rust resistant will help if any moisture is absorbed into the wrap. It will just keep under hood temps down and give a scavenging effect on the motor.

Currently, I have the paint done on the header. Sanded her down with 400 grit as zx34me reccomended on metal, cleaned her with some very abrasive metal cleaner that evaporates super fast, and gave her 6 light coats of the high temp, rust resistant paint in flat black. Looks trick, but it will soon be covered by header wrap Once I have this done and a flex-pipe, it will all go on, hopefully smoothly, and give me some more power (and prolly noise)








kenpokid is offline  
    Reply With Quote