Originally Posted by Krayz_tom
Thanks for the guys!
Is there anyway I can swap the window modules to make mine go up and down with one touch?
I'm not sure if that's even possible. The cars with door modules, the switches and the module itself are controlled by the BCM. The switches only have 3 wires, power, ground and a data wire. You would probably have to re-wire a bunch of stuff, then have the BCM programmed to tell it you now have door modules.
The cheapest/easiest way IMO to add one touch UP/DOWN would be to install an Autoloc module, or something similar. I did this to my SE.