Ford Focus Forum, Ford Focus ST Forum - View Single Post - When projects go wrong / torque strut mount removal mess
View Single Post
Old 08-04-2013, 06:03 AM   #14
_ANTI
Focus Enthusiast
 
_ANTI's Avatar
 
Join Date: Dec 2011
Fan#: 92550
Location: milwaukee, WI
What I Drive: 2003 infrared SVT

Posts: 158
FF Reputation: 1 _ANTI Good Standing Member
Buy-Sell-Trade Rating: (0)
I did fix it. I didn't take pics though as I was working against the clock, but here is how I fixed it:
1. I drilled out as much of the bolt as I could, running the bit through the bottom hole and into the broken bolt.
2. Took the air chisle out, and just bladed away around the inside of the nut that is welded to upper side of the subframe, until the nut broke free.
3. Rode th wife's bike to the hardware store to buy replacement nut, lock washers, and bolt (10x 1.5x 75mm long)
4 put the mount in, ran the bolt through with a lock washer on both sides, and was good to go.
__________________
Bone Stock Infra-Red 2003 SVT #2762 of 3985
_ANTI is offline  
    Reply With Quote