Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum - View Single Post - 2004 ZX3 Camber Kit Question?
View Single Post
Old 04-26-2013, 10:28 PM   #2
felixthecat
w/ my magic bag
 
felixthecat's Avatar
 
Join Date: Nov 2010
Fan#: 80663
Location: Renton, WA
What I Drive: '05 Silver Sport Technologies

Posts: 10,787
Points 12,024, Level 71
Points: 12,024, Level: 71 Points: 12,024, Level: 71 Points: 12,024, Level: 71
Level Up 94% Completed
Level up: 94% Level up: 94% Level up: 94%
Forum Activity 99%
Activity: 99% Activity: 99% Activity: 99%
FF Reputation: 65 felixthecat Excellent Standing Member
Buy-Sell-Trade Rating: (0)
Quote:
Originally Posted by chicows18 View Post
I got some lowering spring installed and couldn't do the alignment. Problem is that the SPC camber kit that I bought now keep messing up the bearing that goes in between the spring plate and the camber kit itself. In fact, every time I try to align the bearing pops out of position. If I want it aligned, it has to stay in that position. If I put it so that it sits perfect in the position its not aligned. Any ideas. I have had to replace the bearings about 6 times now.
Have you tried jacking the car up, high enough=tires off the ground to take the weight off, so you can turn or adjust it. Is the stock bearing plate go around the flange ok & fit? Is that the way the instructions say to install it? Just wondering, why'd you go w/ that kit? I heard a lot of negative issues w/ spc camber kits. I looked at those yrs ago. I just read, To install, remove the strut assembly, compress the spring & replace the o.e. upper bearing plate w/ the 81320 kit.
__________________
Introduce Mr. Torsen to the mixBigger brakes then you- D23 crew- D-Tech- Sedan Revolution= #131
felixthecat is online now  
    Reply With Quote