Focus Fanatics - View Single Post - Injection Molded Center Console Tray WITH Change Holder Thread (MK3 Focus)
View Single Post
Old 02-23-2013, 07:43 PM   #1
Pinion Dominion
Focus Enthusiast
 
Pinion Dominion's Avatar
 
Join Date: Nov 2012
Fan#: 105589
Location: Toronto, Canada
What I Drive: 2012 White Platinum Focus Titanium

Posts: 82
FF Reputation: 4 Pinion Dominion Good Standing Member
Buy-Sell-Trade Rating: (1)
Injection Molded Center Console Tray WITH Change Holder Thread (MK3 Focus)

**FINAL UPDATE**
If you are reading this, sadly the project did not reach its funding goal and there is no way to get this manufactured. If you like the idea of a center console tray (and you have 2012 model Focus), I recommend buying the OEM part. I was a good learning experience for me and something I'll definitely carry with me.


**UPDATE MAR 8, 2013**
Project is Now LIVE until MAR 31, 2013, please see below on how to back this project for as low as $20 (black tray shipped to you).



This project is running from March 3-31, 2013. If after March 31, 2013 the project has not reached its goal ($22,000 raised), the project is cancelled and we will not have another chance at an alternative console tray.

On Indiegogo, you back the project securely using Paypal (you don't need to make an Indiegogo account). You can also not use paypal and pay by credit card. You will be charged immediately when you back the project but then if the project does not reach its goal, you will receive a FULL REFUND. Also when you back a project, you can choose to be anonymous on the project page.

It is better to back the project sooner because these projects will get featured on the main page if they are getting a lot of backers, thus leading to more chances of further funding. Also, it can gain the attention of local newspapers who may run the story and thus we get more exposure. They ran a story for this other Indiegogo project when it reach $6000 in funding.

How To Back Project
Step 1: Click this link http://igg.me/at/TRES/x/2498758
Step 2: You should now be on the project page. Scroll down and click the correct perk on the right. You should click "Early Bird Special" where you will be mailed 1 black tray for $20 (US and Canada) or $25 (International, any country other than US and Canada).


Step 3: Enter Your email Address and click Continue
Step 4: Fill Out Your Shipping Information and then Click Paypal button
Step 5: You'll be redirected to Paypal. Either sign in with your Paypal account or enter your credit card info and press continue
Step 6: You will be charged immediately, and on the next page, you can choose whether to be anonymous or display your name and contribution on the project page.
Step 7: Spread the word.
Step 8: March 31: 11:59PM. If Project reaches $22,000 in funding or more, money will transfer to me and I'll pay supplier who will immediately begin making the mould. If Project does not reach $22,000, receive a FULL refund in 3-5 days (in original payment method).

**UPDATE: MAR 04, 2013**

PROJECT IS NOW LIVE! GOGOGO! via INDIEGOGO

TRES - THE ULTIMATE ACCESSORY TRAY FOR YOUR FORD FOCUS

**UPDATE: MAR 03, 2013**

PROJECT KICKOFF VIDEO:

"TRES - THE ULTIMATE ACCESSORY TRAY FOR YOUR FORD FOCUS" via YouTube
ERROR: If you can see this, then YouTube is down or you don't have Flash installed.


**UPDATE: FEB 26, 2013**
I received the 3D Print today and the fit and function is fantastic. Check it out @ http://www.focusfanatics.com/forum/s...0&postcount=40.



Last edited by Pinion Dominion; 07-10-2013 at 04:41 PM.
Pinion Dominion is offline  
    Reply With Quote