Focus Fanatics - View Single Post - 2.3 stock cam specs anyone? In Factory Manual?
View Single Post
Old 02-21-2013, 12:01 PM   #4
felixthecat
Focus Fanatic
 
felixthecat's Avatar
 
Join Date: Nov 2010
Fan#: 80663
Location: Renton, WA
What I Drive: '05 Silver Sport Technologies

Posts: 8,014
FF Reputation: 52 felixthecat Great Standing Member
Buy-Sell-Trade Rating: (0)
Quote:
Originally Posted by bones33 View Post
Thanks Felix. I see what you mean, pretty mild.
Hey, would you happen to know when the intake begins to open BTDC, or closes ABDC?
No sorry, it doesn't even list it in the shop manual either. To give you a idea, the crane cams I have are= Int. opens -4 degrees atdc/ closes 36 degrees bbdc. Exh= opens 32 degrees bbdc & closes -8 degrees btdc. 4 degrees overlap= intake closes & exhaust opens. This is cranes #224-0010. I do like the next one= 224-0012. Int.= 226 @ .050/exh. 216 @ .050 w/ .410/.385 of lift. Int opens at 3 degrees atdc/ closes at 43 degrees bbdc. exh. opens at 38 degrees bbdc & closes at -2 degrees btdc. The cranes are on a 110 LS vs crowers which are on a 114 LS angle. All the 23 motors should of had cams similar to the cranes spec's to begin w/.
__________________
Introduce Mr. Torsen to the mix D23 crew- D-Tech- Sedan Revolution= #131
felixthecat is online now  
    Reply With Quote