Ford Focus Forum, Ford Focus ST Forum - View Single Post - 2.0 Duratec Clutch Torques
View Single Post
Old 02-16-2013, 10:23 AM   #2
Captain TMI
whynotthinkwhynot's Avatar
Join Date: Jan 2005
Fan#: 18416
Location: the armpit of TN, Memphis, TN
What I Drive: 05 ZXW; 02 Windstar; 13 C-Max SEL

Posts: 20,128
FF Reputation: 270 whynotthinkwhynot Outstanding Standing Member whynotthinkwhynot Outstanding Standing Member whynotthinkwhynot Outstanding Standing Member
Buy-Sell-Trade Rating: (1)
Trans to engine: 35 ft-lbs
Trans mount bracket bolts: 59 ft-lbs
Trans mount nuts: 35 ft-lbs
Trans mount center bolt: 98 ft-lbs

Slave cylinder bolts: 89 in-lbs.
Pressure plate to flywheel bolts: 21 ft-lbs (I suggest tightening these in 2 steps and across from each other)
Flywheel bolts: Procedure- Tighten bolts across from each other like you would wheel lug nuts.
Step 1: 37 ft-lbs
Step 2: 50 ft-lbs
Step 3: 83 ft-lbs

Flywheel to engine bolts MUST be replaced when the flywheel is removed. Failure to do so will come back to get you. Ask around, it's happened to several people on here.
Be eclectic.
---The Complete How-To Archive--

Moderating everything now, let me know if I can help.

Originally Posted by the user formerly known as ZX3_Chick View Post
You're special aren't you.
whynotthinkwhynot is offline  
    Reply With Quote